K3 audio problem at T2T

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 audio problem at T2T

Garry Shapiro
Just spoke to VK4FW at T2T. One of their K3's works on CW but has died
on SSB. Bill says they disconnected all cables, set all settings to
match another K3 that is working on SSB, checked the microphone routing
on the Main Menu and of course swapped out headsets. No joy. They are
frantic to get it working and are at this moment on 24945 SSB listening
5 up. If any of the Brain Trust can help, please do. It's 2026Z.

Garry, NI6t
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 audio problem at T2T

W7GJ, Lance
I called them and worked them but was unable to make a suggestion to them that they
download the same configuration file as used by the other K3, and re-start it.  Maybe
they have already tried this, I don't know.

VY 73, Lance


On 11/14/2011 8:27 PM, Garry Shapiro wrote:

> Just spoke to VK4FW at T2T. One of their K3's works on CW but has died
> on SSB. Bill says they disconnected all cables, set all settings to
> match another K3 that is working on SSB, checked the microphone routing
> on the Main Menu and of course swapped out headsets. No joy. They are
> frantic to get it working and are at this moment on 24945 SSB listening
> 5 up. If any of the Brain Trust can help, please do. It's 2026Z.
>
> Garry, NI6t
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

--
Lance Collister, W7GJ
(ex WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX, 3D2LR, 5W0GJ)
P.O. Box 73
Frenchtown, MT   59834-0073
USA
TEL: (406) 626-5728
QTH: DN27ub
URL: http://www.bigskyspaces.com/w7gj
Windows Messenger: [hidden email]
Skype: lanceW7GJ
2m DXCC #11/6m DXCC #815

Interested in 6m EME?  Ask me about subscribing to the Magic Band EME
email group, or just fill in the request box at the bottom of my web
page (above)!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 audio problem at T2T

Greg - AB7R
In reply to this post by Garry Shapiro
Garry,

I am not at home right.  Using another radio's config file will probably
not work as the calibrations would be different between the two rigs.

If you can get them on the air or by email I would suggest doing the EEINIT
process and then redo the calibrations outlined in the manual (watt meter,
TX Gain, VCO CAL and Ref CAL).  It should not take them more than 15-20
min.  They will also have to resetup their filter settings and activate
whatever options they have in the CONFIG menu.

No guarantee this will work but considering the urgency it is probably the
first best bet to try.

73
Greg
AB7R



On Mon, Nov 14, 2011 at 12:27 PM, Garry Shapiro <[hidden email]> wrote:

> Just spoke to VK4FW at T2T. One of their K3's works on CW but has died
> on SSB. Bill says they disconnected all cables, set all settings to
> match another K3 that is working on SSB, checked the microphone routing
> on the Main Menu and of course swapped out headsets. No joy. They are
> frantic to get it working and are at this moment on 24945 SSB listening
> 5 up. If any of the Brain Trust can help, please do. It's 2026Z.
>
> Garry, NI6t
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 audio problem at T2T

Eric Swartz - WA6HHQ
Administrator
If they are using a condenser mic, make sure the mic boas is turned on.

73, Eric

---
www.elecraft.com


On 11/14/2011 1:02 PM, Greg wrote:

> Garry,
>
> I am not at home right.  Using another radio's config file will probably
> not work as the calibrations would be different between the two rigs.
>
> If you can get them on the air or by email I would suggest doing the EEINIT
> process and then redo the calibrations outlined in the manual (watt meter,
> TX Gain, VCO CAL and Ref CAL).  It should not take them more than 15-20
> min.  They will also have to resetup their filter settings and activate
> whatever options they have in the CONFIG menu.
>
> No guarantee this will work but considering the urgency it is probably the
> first best bet to try.
>
> 73
> Greg
> AB7R
>
>
>
> On Mon, Nov 14, 2011 at 12:27 PM, Garry Shapiro<[hidden email]>  wrote:
>
>> Just spoke to VK4FW at T2T. One of their K3's works on CW but has died
>> on SSB. Bill says they disconnected all cables, set all settings to
>> match another K3 that is working on SSB, checked the microphone routing
>> on the Main Menu and of course swapped out headsets. No joy. They are
>> frantic to get it working and are at this moment on 24945 SSB listening
>> 5 up. If any of the Brain Trust can help, please do. It's 2026Z.
>>
>> Garry, NI6t
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 audio problem at T2T

Eric Swartz - WA6HHQ
Administrator
bias...

---
www.elecraft.com


On 11/14/2011 1:07 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
> If they are using a condenser mic, make sure the mic boas is turned on.
>
> 73, Eric
>
> ---
> www.elecraft.com
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html