Login  Register

K3 connector

classic Classic list List threaded Threaded
6 messages Options Options
Embed post
Permalink
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

K3 connector

Butch Schartau
2 posts
There is a modular connector on the bottom near the front right corner,
what's if for?

Butch K0BS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Re: K3 connector

M0XDF
1430 posts
Elecraft's use in testing and service - not usable by 'end user'  
although in the early days there were mutterings on it's use for  
attachments. I'd consider it not to be there until/if something  
eventually comes along - the P3 will not be using this as far as I know.
73 de M0XDF, K3 #174
--
Any sufficiently advanced technology is indistinguishable from magic.
-Arthur C Clarke, science fiction writer (1917-2008)

On 20 Aug 2009, at 17:36, Butch Schartau wrote:

> There is a modular connector on the bottom near the front right  
> corner,
> what's if for?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Re: K3 connector

N5GE
979 posts
In reply to this post by Butch Schartau
On Thu, 20 Aug 2009 11:36:50 -0500, Butch Schartau
<[hidden email]> wrote:

>There is a modular connector on the bottom near the front right corner,
>what's if for?
>
>Butch K0BS
[snip]

Factory testing

Tom, N5GE

[hidden email]
K3 #806, K3 #1055, PR6,
XV144, XV432, KRC2,
W1 and other small kits.
http://www.n5ge.com
http://www.swotrc.net

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Amateur Radio Operator N5GE
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Re: K3 connector

Brett Howard
929 posts
In reply to this post by Butch Schartau
That is the test port which allows for working with the software and what
not...  There has been talk of Elecraft designing some sort of keyboard that
may be able to be plugged in there but at the moment that has yet to
materialize.  So for now just consider it a "test" port for the software
design engineers.

~Brett (KC7OTG)

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Butch Schartau
Sent: Thursday, August 20, 2009 9:37 AM
To: [hidden email]
Subject: [Elecraft] K3 connector

There is a modular connector on the bottom near the front right corner,
what's if for?

Butch K0BS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Re: K3 connector

Alan Bloom
845 posts
In reply to this post by M0XDF
The P3 has a similar connector, but it is internal to the cabinet.  It
is for programming the boot loader and initial firmware at the factory.

Alan N1AL


On Thu, 2009-08-20 at 17:45 +0100, David Ferrington, M0XDF wrote:
> Elecraft's use in testing and service - not usable by 'end user'  
> although in the early days there were mutterings on it's use for  
> attachments. I'd consider it not to be there until/if something  
> eventually comes along - the P3 will not be using this as far as I know.
> 73 de M0XDF, K3 #174

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
| More
Print post
Permalink

Diagnostic program (was; Re: K3 connector)

Jon Kåre Hellan
107 posts
In reply to this post by N5GE
Radio Amateur N5GE wrote:

> On Thu, 20 Aug 2009 11:36:50 -0500, Butch Schartau
> <[hidden email]> wrote:
>
>> There is a modular connector on the bottom near the front right corner,
>> what's if for?
>>
>> Butch K0BS
> [snip]
>
> Factory testing

Could the factory test programs also be useful for us, when we have problems?
Do they provide useful diagnostics, or are they just pass/fail indicators?

73
Jon LA4RT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html