K3 - drop in used value?

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 - drop in used value?

Bill-3
With the introduction of the K3S and the KSYN3A synth upgrade kit - I
get the feeling that my unupgraded K3 (6xxx serial number) really took a
serious hit in value.  Originally, I put $2909 (less shipping) into my
K3 kit, with 100 Watts, tuner, IF adapter (for the P3), wide coverage,
AM filter, narrow SSB filter.

Maybe my math is off, but it looks to me that a new K3S equipped the
same would cost me about $3600. It is fair to say the slightly over 20%
increase is for inflation and improved specifications.

I felt that my K3 was worth about $2300 as a used piece of gear. After
the new synth was introduced, that was reduced to about $2100. Now with
the K3S on the market, I figure a realistic value would be closer to
$1800 (maybe less). Perhaps my estimates are low, but being realistic
and _IF_ wanting to sell...............

Yet another value question: will the firmware upgrades for the K3
continue - or will only the K3S be supported? How long for the K3 - if
supported at all?

Am I going to sell? No! I have the P3, KAT500, and KPA500 - so I am all
into the K-Line. Will I upgrade to the K3S - I'll wait and read the user
comments in a few months. Same for the upgraded synth - if I thought I
needed it for my rag chew on 75/40 operation - I'd order it immediately.

With my thinking and estimating in mind, I wonder how many will soon
upgrade from the K3 to the K3S?

Bill W2BLC K-Line


**
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 - drop in used value?

Carl Yaffey
I’m going to look at these two options:
1) Buy a new K3S and sell my K3.
2) Send my K3 to Elecraft and have them upgrade it as far as possible to a K3S.

It will be interesting to see which costs the most.
73,
Carl K8NU

> On May 15, 2015, at 8:15 AM, Bill <[hidden email]> wrote:
>
> With the introduction of the K3S and the KSYN3A synth upgrade kit - I get the feeling that my unupgraded K3 (6xxx serial number) really took a serious hit in value.  Originally, I put $2909 (less shipping) into my K3 kit, with 100 Watts, tuner, IF adapter (for the P3), wide coverage, AM filter, narrow SSB filter.

Carl Yaffey  K8NU
Recording studio.
[hidden email]
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com









______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 - drop in used value?

Vic Rosenthal
You could also buy a few pieces from Elecraft and plug them into your
K3. It would probably take you an afternoon and be less expensive than
your option 2.

73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/

On 15 May 2015 16:42, Carl Yaffey wrote:

> I’m going to look at these two options:
> 1) Buy a new K3S and sell my K3.
> 2) Send my K3 to Elecraft and have them upgrade it as far as possible to a K3S.
>
> It will be interesting to see which costs the most.
> 73,
> Carl K8NU
>
>> On May 15, 2015, at 8:15 AM, Bill <[hidden email]> wrote:
>>
>> With the introduction of the K3S and the KSYN3A synth upgrade kit - I get the feeling that my unupgraded K3 (6xxx serial number) really took a serious hit in value.  Originally, I put $2909 (less shipping) into my K3 kit, with 100 Watts, tuner, IF adapter (for the P3), wide coverage, AM filter, narrow SSB filter.
>
> Carl Yaffey  K8NU
> Recording studio.
> [hidden email]
> 614 268 6353, Columbus OH
> http://www.carl-yaffey.com
> http://www.grassahol.com
> http://www.bluesswing.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 - drop in used value?

Rose
In reply to this post by Bill-3
Bill,

"Craig" at Elecraft assures me that the K3 will be fully supported in for
the foreseeable future.

The utility will automatically determine which version it's connected to
when updating.

Nothing changes for the K3 user.

73 !

Ken - K0PP
K3 S/N 0056
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 - drop in used value?

Phil Hystad-3
>
> "Craig" at Elecraft assures me that the K3 will be fully supported in for
> the foreseeable future.
>

And, I am thinking that owner’s of a K3 really have no where else to go if
they want on-going support of their rigs from the vendor.  What other vendor
even comes close to the kind of support given by Elecraft.  That is, the minute
that you take ownership of a brand new Icom, Kenwood, or whatever, the availability
of upgrading your rig ends for the most part.

73, phil, K7PEH

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 - drop in used value?

Tom Azlin W7SUA
In reply to this post by Bill-3
I plan to add in all the upgrades possible as I have been doing all
along. I am not worried about the resale value of my K3 falling as I
have gotten any value loss back many fold in enjoyable operating. With
the upgrades will be nice to have coverage down to 100KHz so the new LF
bands will be included.

73, tom w7sua (s/n 17xx)

On 5/15/2015 5:15 AM, Bill wrote:
> With the introduction of the K3S and the KSYN3A synth upgrade kit - I
> get the feeling that my unupgraded K3 (6xxx serial number) really took a
> serious hit in value.

[...]

> With my thinking and estimating in mind, I wonder how many will soon
> upgrade from the K3 to the K3S?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 - drop in used value?

ke9uw
In reply to this post by Bill-3
My approach would be to buy the K3S and transfer the add-ons that will transfer (small mods req too) to the new rig. Then the K3 could be a bare bones QRP rig and also use it for other locations in the house away from the shack.
Chuck, KE9UW
Reply | Threaded
Open this post in threaded view
|

Fwd: K3 - drop in used value?

Yngvi (TF3Y)
Personally I think it is very hard to come up with a Consumer Electronics
device that has retained value as well as the K3. No doubt this can be
traced to the loyalty of Elecraft to its clients and their excellent
support and responsiveness. I think Elecraft has been and will be rewarded
by reciprocal loyalty.

As with all modern electronics advancements eventually makes most
everything obsolete.

73, Yngvi TF3Y

On Fri, May 15, 2015 at 3:16 PM, ke9uw <[hidden email]> wrote:

> My approach would be to buy the K3S and transfer the add-ons that will
> transfer (small mods req too) to the new rig. Then the K3 could be a bare
> bones QRP rig and also use it for other locations in the house away from
> the
> shack.
>
>
>
> -----
> Chuck, KE9UW
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3-drop-in-used-value-tp7602893p7602904.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>




--
http://www.tf3y.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 - drop in used value?

Elecraft mailing list
In reply to this post by ke9uw
I believe all manufactures now offer update to their products.  I have updated my YAESU and Kenwood xcvrs several times.  True they maybe be software not hardware, but the results maybe close to the same.
George, W6GF


     On Friday, May 15, 2015 8:54 AM, ke9uw <[hidden email]> wrote:
   

 My approach would be to buy the K3S and transfer the add-ons that will
transfer (small mods req too) to the new rig. Then the K3 could be a bare
bones QRP rig and also use it for other locations in the house away from the
shack.



-----
Chuck, KE9UW
--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-drop-in-used-value-tp7602893p7602904.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]


 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Fwd: K3 - drop in used value?

Mike Reublin NF4L
In reply to this post by Yngvi (TF3Y)
What you say is of course true. Death is also inevitable, and most (not all) are saddened by it's arrival and miss the departed. It's an emotional time.

73, Mike NF4L


> On May 15, 2015, at 12:02 PM, Yngvi (TF3Y) <[hidden email]> wrote:
>
> Personally I think it is very hard to come up with a Consumer Electronics
> device that has retained value as well as the K3. No doubt this can be
> traced to the loyalty of Elecraft to its clients and their excellent
> support and responsiveness. I think Elecraft has been and will be rewarded
> by reciprocal loyalty.
>
> As with all modern electronics advancements eventually makes most
> everything obsolete.
>
> 73, Yngvi TF3Y

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Fwd: K3 - drop in used value?

Wes (N7WS)
B.B. King.  The Thrill is Gone.


On 5/15/2015 10:18 AM, Mike Reublin NF4L wrote:
> What you say is of course true. Death is also inevitable, and most (not all) are saddened by it's arrival and miss the departed. It's an emotional time.
>
> 73, Mike NF4L

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 - drop in used value?

Jim Bolit
In reply to this post by Bill-3
The current K3 capabilities are not anywhere used to their fullest potential
by most amateurs.

No poll involved, but in major contests is where you will find the K3
potential of benefit.  And that statement goes for CW, SSB is a question in
my mind as I don't bother with SSB.

The current K3 is MORE that capable if you are gunning for Top 10 (or
better) finish in ANY major contest.

Jim
W6AIM




-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Bill
Sent: Friday, May 15, 2015 5:16 AM
To: [hidden email]
Subject: [Elecraft] K3 - drop in used value?

With the introduction of the K3S and the KSYN3A synth upgrade kit - I get
the feeling that my unupgraded K3 (6xxx serial number) really took a serious
hit in value.  Originally, I put $2909 (less shipping) into my
K3 kit, with 100 Watts, tuner, IF adapter (for the P3), wide coverage, AM
filter, narrow SSB filter.

Maybe my math is off, but it looks to me that a new K3S equipped the same
would cost me about $3600. It is fair to say the slightly over 20% increase
is for inflation and improved specifications.

I felt that my K3 was worth about $2300 as a used piece of gear. After the
new synth was introduced, that was reduced to about $2100. Now with the K3S
on the market, I figure a realistic value would be closer to
$1800 (maybe less). Perhaps my estimates are low, but being realistic and
_IF_ wanting to sell...............

Yet another value question: will the firmware upgrades for the K3 continue -
or will only the K3S be supported? How long for the K3 - if supported at
all?

Am I going to sell? No! I have the P3, KAT500, and KPA500 - so I am all into
the K-Line. Will I upgrade to the K3S - I'll wait and read the user comments
in a few months. Same for the upgraded synth - if I thought I needed it for
my rag chew on 75/40 operation - I'd order it immediately.

With my thinking and estimating in mind, I wonder how many will soon upgrade
from the K3 to the K3S?

Bill W2BLC K-Line


**
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]