Elecraft

[K3] - dual lock

Classic

List

Threaded

6 messages Options

M0XDF

[K3] - dual lock

Wonder if this is possible, now or in future
Lock the controls on VFOa independently of VFOb
Or perhaps more likely (and just as good when I get it), lock the controls
on the main tx/Rx independently of the second Rx?
--
Accuracy Transcends Speed

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Tom Hammond-2

Re: [K3] - dual lock

David:

You can do that now... just LOCK VFO A, swap A/B, lock VFO A (which
WAS VFO B), swap again and both are locked.

73,

Tom N0SS

At 10:03 09/19/2007, you wrote:

>Wonder if this is possible, now or in future
>Lock the controls on VFOa independently of VFOb
>Or perhaps more likely (and just as good when I get it), lock the controls
>on the main tx/Rx independently of the second Rx?
>--
>Accuracy Transcends Speed
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

wayne burdick

Re: [K3] - dual lock

Administrator

Or use BSET to access LOCK for VFO B directly.

73
Wayne
N6KR

On Sep 19, 2007, at 12:20 PM, Tom Hammond wrote:

> David:
>
> You can do that now... just LOCK VFO A, swap A/B, lock VFO A (which
> WAS VFO B), swap again and both are locked.
>
> 73,

---

http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Greg - AB7R

Re: [K3] - dual lock

In reply to this post by M0XDF

An easier way to do this is to Hold BSET, then LOCK, then BSET again. VFO B is now locked.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065

On Wed Sep 19 15:20 , Tom Hammond sent:

>David:
>
>You can do that now... just LOCK VFO A, swap A/B, lock VFO A (which
>WAS VFO B), swap again and both are locked.
>
>73,
>
>Tom N0SS
>
>At 10:03 09/19/2007, you wrote:
>>Wonder if this is possible, now or in future
>>Lock the controls on VFOa independently of VFOb
>>Or perhaps more likely (and just as good when I get it), lock the controls
>>on the main tx/Rx independently of the second Rx?
>>--
>>Accuracy Transcends Speed
>>
>>
>>_______________________________________________
>>Elecraft mailing list
>>Post to: [hidden email]
>>You must be a subscriber to post to the list.
>>Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>>
>>Help: http://mailman.qth.net/subscribers.htm
>>Elecraft web page: http://www.elecraft.com
>
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

M0XDF

Re: [K3] - dual lock

In reply to this post by wayne burdick

Brilliant!

On 19/9/07 20:50, "wayne burdick" <[hidden email]> sent:

> Or use BSET to access LOCK for VFO B directly.
>
> 73
> Wayne
> N6KR
>
> On Sep 19, 2007, at 12:20 PM, Tom Hammond wrote:
>
>> David:
>>
>> You can do that now... just LOCK VFO A, swap A/B, lock VFO A (which
>> WAS VFO B), swap again and both are locked.
>>
>> 73,
>
> ---
>
> http://www.elecraft.com
>

--
Now, here, you see, it takes all the running you can do, to keep in the
same place. If you want to get somewhere else, you must run at least twice
as fast as that! -Lewis Carroll, mathematician and writer (1832-1898)

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Tom Hammond-2

Re: [K3] - dual lock

In reply to this post by wayne burdick

Nah... MUCH TOO EASY.. <G>

I keep forgetting about BSET... and shouldn't forget it... it's a NICE feature.

Tom

At 14:50 09/19/2007, wayne burdick wrote:

>Or use BSET to access LOCK for VFO B directly.
>
>73
>Wayne
>N6KR
>
>On Sep 19, 2007, at 12:20 PM, Tom Hammond wrote:
>
>>David:
>>
>>You can do that now... just LOCK VFO A, swap A/B, lock VFO A (which
>>WAS VFO B), swap again and both are locked.
>>
>>73,
>
>---
>
>http://www.elecraft.com