Elecraft

K3 fixed TX audio from the monitor

Classic

List

Threaded

3 messages Options

Peter-64

K3 fixed TX audio from the monitor

Hi

A long standing wish is to get fixed level audio out from the audio
monitor for the K3
Some operators don't like there voice hearing and turn of the audio
monitor low or off.
Result is a blank or weak TX audio in the recording.
See http://mailman.qth.net/pipermail/elecraft/2009-January/102536.html
The RX part is done a long time a go but till now no solution for the
TX part.

With the new rule of audio recording for the upcomming CQWW it pops up
again and I like to ask if its possible to add a fixed audio level
output for TX

From http://www.cqww.com/rules.htm
*C. Audio Recordings:* Any single operator entrant (see V.A.1) competing
for a top three finish at the (a) World, (b) Continent, or (c) USA
levels, must record the transmitted and received audio as heard by the
operator for the duration of the contest operation.

Are we not al winners in some kind of catagory? :-)

Peter
PC2A

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Ed Muns

Re: K3 fixed TX audio from the monitor

Use Line Out.

73,
Ed W0YK
On Aug 9, 2015 4:55 AM, Peter <[hidden email]> wrote:

>
> Hi
>
> A long standing wish is to get fixed level audio out from the audio
> monitor for the K3
> Some operators don't like there voice hearing and turn of the audio
> monitor low or off.
> Result is a blank or weak TX audio in the recording.
> See http://mailman.qth.net/pipermail/elecraft/2009-January/102536.html
> The RX part is done a long time a go but till now no solution for the
> TX part.
>
> With the new rule of audio recording for the upcomming CQWW it pops up
> again and I like to ask if its possible to add a fixed audio level
> output for TX
>
> From http://www.cqww.com/rules.htm
> *C. Audio Recordings:* Any single operator entrant (see V.A.1) competing
> for a top three finish at the (a) World, (b) Continent, or (c) USA
> levels, must record the transmitted and received audio as heard by the
> operator for the duration of the contest operation.
>
> Are we not al winners in some kind of catagory? :-)
>
> Peter
> PC2A
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Peter-64

Re: K3 fixed TX audio from the monitor

In reply to this post by Peter-64

Ed

Line out has only RX fixed audio level settings.
TX audio is per TX monitor setting and by operator prefference .

In worse case, some one don't like any feedback in SSB and you wil find
a blank recoring during TX

73 Peter, PC22

[hidden email] schreef op 09/08/2015 17:59:
> Use Line Out.
73, Ed W0YK On Aug 9, 2015 4:55 AM, Peter <[hidden email]> wrote:

>> Hi
>>
>> A long standing wish is to get fixed level audio out from the audio
>> monitor for the K3
>> Some operators don't like there voice hearing and turn of the? audio
>> monitor low or off.
>> Result is a blank or weak? TX audio in the recording.
>> Seehttp://mailman.qth.net/pipermail/elecraft/2009-January/102536.html
>> The RX part is done a long time a go but till now no solution for the?
>> TX part.
>>
>> With the new rule of audio recording for the upcomming CQWW it pops up
>> again and I like to ask if its possible to add a fixed audio level
>> output for TX
>>
>> Fromhttp://www.cqww.com/rules.htm
>> *C. Audio Recordings:* Any single operator entrant (see V.A.1) competing
>> for a top three finish at the (a) World, (b) Continent, or (c) USA
>> levels, must record the transmitted and received audio as heard by the
>> operator for the duration of the contest operation.
>>
>> Are we not al winners in some kind of catagory?
>>
>> Peter
>> PC2A
>