K3 not loading MCU 4.48

[VE3WDM]

I noticed on the firmware page MCU 4.48 is available but I am not able to load it on my K3. I am using the K3 utility ver 1.12.3.28 which is the latest. The utility in forms me of the following.

          Installed on K3                      Available
MCU 04.39                                      0.439
FPF  01.14                                      01.14
DSP1 02.73                                    02.73
DSP2 02.73                                    02.73

When I check for a newer version I get no indication of a 4.48 ver availble.
Mike
VE3WDM
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Have you clicked the "Copy Files from Elecraft" button on the K3 Utility
Firmware tab?  I just did this, and it fetched 04.48 from the FTP site.

See K3 Utility Help, "Getting Started", next to last step.

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Mike Weir
Sent: Friday, April 27, 2012 2:23 PM
To: [hidden email]
Subject: [Elecraft] K3 not loading MCU 4.48


I noticed on the firmware page MCU 4.48 is available but I am not able to
load it on my K3. I am using the K3 utility ver 1.12.3.28 which is the
latest. The utility in forms me of the following.

          Installed on K3                      Available
MCU 04.39                                      0.439
FPF  01.14                                      01.14
DSP1 02.73                                    02.73
DSP2 02.73                                    02.73

When I check for a newer version I get no indication of a 4.48 ver availble.
Mike
VE3WDM
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Matt Zilmer]

You probably need to copy all the new firmware using the push button
in the K3 utility.  Place it in its own folder, from which you can
download it into the K3.

matt W6NIA

On Fri, 27 Apr 2012 17:23:22 -0400, you wrote:

>
>I noticed on the firmware page MCU 4.48 is available but I am not able to load it on my K3. I am using the K3 utility ver 1.12.3.28 which is the latest. The utility in forms me of the following.
>
>          Installed on K3                      Available
>MCU 04.39                                      0.439
>FPF  01.14                                      01.14
>DSP1 02.73                                    02.73
>DSP2 02.73                                    02.73
>
>When I check for a newer version I get no indication of a 4.48 ver availble.
>Mike
>VE3WDM
>    
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Mike,

Note that your listing shows 4.39 is Installed on your K3  and also that
same version is "Available"
That means that 4.39 is the highest level available on your computer.  
You must click on "Get New Files fron Elecraft" to download them into
your computer.

73,
Don W3FPR

On 4/27/2012 5:23 PM, Mike Weir wrote:

> I noticed on the firmware page MCU 4.48 is available but I am not able to load it on my K3. I am using the K3 utility ver 1.12.3.28 which is the latest. The utility in forms me of the following.
>
>            Installed on K3                      Available
> MCU 04.39                                      0.439
> FPF  01.14                                      01.14
> DSP1 02.73                                    02.73
> DSP2 02.73                                    02.73
>
> When I check for a newer version I get no indication of a 4.48 ver availble.
> Mike
> VE3WDM
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Randy Moore]

Not having updated my firmware for a while, this puzzled me too. Perhaps more specific wording instead of "Available" could be considered.

73,
Randy, KS4L

On Apr 27, 2012, at 5:09 PM, Don Wilhelm <[hidden email]> wrote:

> Mike,
>
> Note that your listing shows 4.39 is Installed on your K3  and also that
> same version is "Available"
> That means that 4.39 is the highest level available on your computer.  
> You must click on "Get New Files fron Elecraft" to download them into
> your computer.
>
> 73,
> Don W3FPR
>
> On 4/27/2012 5:23 PM, Mike Weir wrote:
>> I noticed on the firmware page MCU 4.48 is available but I am not able to load it on my K3. I am using the K3 utility ver 1.12.3.28 which is the latest. The utility in forms me of the following.
>>
>>           Installed on K3                      Available
>> MCU 04.39                                      0.439
>> FPF  01.14                                      01.14
>> DSP1 02.73                                    02.73
>> DSP2 02.73                                    02.73
>>
>> When I check for a newer version I get no indication of a 4.48 ver availble.
>> Mike
>> VE3WDM
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill K9YEQ]

One more issue. Be sure to note where you are saving the download.  The K3
Looks to a default.  If you have changed this your "desktop" will not find
the right version.  If you continue to have an issue, let me know and I will
help you navigate.

73,
Bill
K9YEQ


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Dick Dievendorff
Sent: Friday, April 27, 2012 4:44 PM
To: 'Mike Weir'; [hidden email]
Subject: Re: [Elecraft] K3 not loading MCU 4.48

Have you clicked the "Copy Files from Elecraft" button on the K3 Utility
Firmware tab?  I just did this, and it fetched 04.48 from the FTP site.

See K3 Utility Help, "Getting Started", next to last step.

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Mike Weir
Sent: Friday, April 27, 2012 2:23 PM
To: [hidden email]
Subject: [Elecraft] K3 not loading MCU 4.48


I noticed on the firmware page MCU 4.48 is available but I am not able to
load it on my K3. I am using the K3 utility ver 1.12.3.28 which is the
latest. The utility in forms me of the following.

          Installed on K3                      Available
MCU 04.39                                      0.439
FPF  01.14                                      01.14
DSP1 02.73                                    02.73
DSP2 02.73                                    02.73

When I check for a newer version I get no indication of a 4.48 ver availble.
Mike
VE3WDM
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[VE3WDM]

I would like to thank everyone for their input and I have found pressing "copy files from Elecraft" did the trick (thanks Dick K6KR for the info) My problem was I had just updated my P3 and it does not have this button in the P3 Utility. You are just give the option of "Check version now" push button and all worked well doing that so I just tried the same in the K3 Utility.  
Thanks again for all your input.
Mike
VE3WDM