K3 problems at 3D2KJ
Locked
 
|
Perhaps someone here can help. If so, please respond to Rys at
[hidden email] 73, Dave, AA6YQ -----Original Message----- From: [hidden email] [mailto:[hidden email]]On Behalf Of Ryszard Tymkiewicz Sent: Monday, October 12, 2009 2:05 AM To: [hidden email] Subject: Topband: Fw: 3d2kj I'm sorry I attache longer text here but our friends on Fiji have serious problems. Below text were sent to Elecraft too but because of holidays I'm not sure if they will be able to read it now. Maybe someone will be able to help them? 73 Rys SP5EWY ========================================================= Dear Sir, My callsign is 3D2KJ (SP5DRH at home), We are on a dx-pedition on Fiji with the main interest to activate 160m. We have here two rigs: K2 and K3 in use. The last night we have encountered a serious trouble with our K3 (S/N 1739) Since that time, we are observing short (a few seconds) lost of power on 160m, while CW is used. This behavior concerns ONLY 160m! That happens with a small power level being set at 6W, as we are using this rig to drive an external PA. Then, the output returns to the previous level, with a short view of a full bar on the LCD display. We tried to find if it occurs on TUNE position as well, but it looks that it happens very rarely there. The rate of this behavior seems to be unpredictable but it is sometimes a few times within a minute! On other bands everything is OK. It looks, moreover, that the rig produces sometimes some spurious signals on 160m resulting an odd behavior of our home made PA, while using a K2 instead of K3 solves the problem. This makes us unhappy since this failure might jeopardize our program. Since one of us (3d2mj – home sp5eaq) is an engineer in electronics, we have performed several tests and we are now convinced that the nature of the problem is of K3. We re-initialized the rig and nothing changed. The transceiver is loaded with the low SWR input of the PA but the same problem happens if it is loaded just with an antenna. Any local external support is impossible, we have basic tools (including soldering iron), some spare parts (but not K3 origin) and an AC/DC meter. There is a possibility that the problem began during a crash of PA during transmition without load (failure of antenna). The PA has been then repaired, but soon we found the K3 problem. It might be just a coincidence since before we had used 15W of drive. 73 de 3d2kj&3d2mj ========================================================== _______________________________________________ Topband mailing list [hidden email] http://lists.contesting.com/mailman/listinfo/topband No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.14.9/2428 - Release Date: 10/12/09 04:01:00 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
Administrator
|
I already replied to him directly.
73, Wayne N6KR On Oct 12, 2009, at 11:04 AM, Dave AA6YQ wrote: > Perhaps someone here can help. If so, please respond to Rys at > [hidden email] > > 73, > > Dave, AA6YQ > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]]On Behalf Of Ryszard > Tymkiewicz... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: K3 problems at 3D2KJ
|
Administrator
|
In reply to this post by AA6YQ
Wayne is responding to them.
73, Eric _..._ -----Original Message----- From: "Dave AA6YQ" <[hidden email]> Date: Monday, Oct 12, 2009 11:04 am Subject: [Elecraft] K3 problems at 3D2KJ To: <[hidden email]> CC: [hidden email] Perhaps someone here can help. If so, please respond to Rys at [hidden email] 73, Dave, AA6YQ -----Original Message----- From: [hidden email] [mailto:[hidden email]]On Behalf Of Ryszard Tymkiewicz Sent: Monday, October 12, 2009 2:05 AM To: [hidden email] Subject: Topband: Fw: 3d2kj I'm sorry I attache longer text here but our friends on Fiji have serious problems. Below text were sent to Elecraft too but because of holidays I'm not sure if they will be able to read it now. Maybe someone will be able to help them? 73 Rys SP5EWY ========================================================= Dear Sir, My callsign is 3D2KJ (SP5DRH at home), We are on a dx-pedition on Fiji with the main interest to activate 160m. We have here two rigs: K2 and K3 in use. The last night we have encountered a serious trouble with our K3 (S/N 1739) Since that time, we are observing short (a few seconds) lost of power on 160m, while CW is used. This behavior concerns ONLY 160m! That happens with a small power level being set at 6W, as we are using this rig to drive an external PA. Then, the output returns to the previous level, with a short view of a full bar on the LCD display. We tried to find if it occurs on TUNE position as well, but it looks that it happens very rarely there. The rate of this behavior seems to be unpredictable but it is sometimes a few times within a minute! On other bands everything is OK. It looks, moreover, that the rig produces sometimes some spurious signals on 160m resulting an odd behavior of our home made PA, while using a K2 instead of K3 solves the problem. This makes us unhappy since this failure might jeopardize our program. Since one of us (3d2mj - home sp5eaq) is an engineer in electronics, we have performed several tests and we are now convinced that the nature of the problem is of K3. We re-initialized the rig and nothing changed. The transceiver is loaded with the low SWR input of the PA but the same problem happens if it is loaded just with an antenna. Any local external support is impossible, we have basic tools (including soldering iron), some spare parts (but not K3 origin) and an AC/DC meter. There is a possibility that the problem began during a crash of PA during transmition without load (failure of antenna). The PA has been then repaired, but soon we found the K3 problem. It might be just a coincidence since before we had used 15W of drive. 73 de 3d2kj&3d2mj ========================================================== _______________________________________________ Topband mailing list [hidden email] http://lists.contesting.com/mailman/listinfo/topband No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.14.9/2428 - Release Date: 10/12/09 04:01:00 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to [K3]
|
1 view|%1 views
| Free forum by Nabble | Edit this page |