K3 second receiver install question

[KD8NNU]

I am thinking about purchasing and installing a sub-receiver for working
split and diversity.

When reading the installation guide there is a section called Checking
and Modifying Resistor R91 and DAC Input Circuits.  I have a 1 year old
K3 SN 4912 is it safe to assume that this is already incorporated in my
rig.    I dont solder real well and dont feel confortable with the idea
of cutting traces.

Thanks

Happy New Year

~73
Don
KD8NNU

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Don,

That note has been in the SubRX manual for a very long time - I am
looking at Rev. C dated October 16, 2008 - at that time there were K3
being shipped that already had the change.

So, there is a *very* high probability that your K3 already has the
change since it is only a year old.
BUT make the check anyway just to be certain.

73,
Don W3FPR

On 1/1/2012 1:15 PM, [hidden email] wrote:

> I am thinking about purchasing and installing a sub-receiver for working
> split and diversity.
>
> When reading the installation guide there is a section called Checking
> and Modifying Resistor R91 and DAC Input Circuits.  I have a 1 year old
> K3 SN 4912 is it safe to assume that this is already incorporated in my
> rig.    I dont solder real well and dont feel confortable with the idea
> of cutting traces.
>
> Thanks
>
> Happy New Year
>
> ~73
> Don
> KD8NNU
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Arie Kleingeld PA3A-2]

Don,

For the installation of the K3 subrx, see:
http://www.youtube.com/watch?v=5EJL8SlJ_L8

73,
Arie PA3A


Op 1-1-2012 19:15, [hidden email] schreef:

> I am thinking about purchasing and installing a sub-receiver for working
> split and diversity.
>
> When reading the installation guide there is a section called Checking
> and Modifying Resistor R91 and DAC Input Circuits.  I have a 1 year old
> K3 SN 4912 is it safe to assume that this is already incorporated in my
> rig.    I dont solder real well and dont feel confortable with the idea
> of cutting traces.
>
> Thanks
>
> Happy New Year
>
> ~73
> Don
> KD8NNU
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html