K3: wish-toggle pwr levels

[DOUGLAS ZWIEBEL]

You have my vote!  Not urgent, but what a great (fun) feature to include!

de Doug KR2Q
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Evert Bakker (PA2KW)]

Good day to all,

First of all:

K3 (812) arrived.
Ordered 21 Nov 2007
Order confirmation 22 april
Sent 24 april
Arrived 28 april
Let's see if reality meets expectations....(I'll let you know)


I've finished the building procedure and in the process of calibration.
When calibrating the TCXO (1 ppm) you are told to locate CONFIG:REF CAL
menu.
No problem so far. The next sentence tells me to tap [1] to change the name
to REF xxC. I'm tapping [1], but I'm getting the message "b set".
What am I doing wrong here? (see page 47 right column at the bottom of the
owners manual)

Thanks for replying in advance.

73's, Evert PA2KW

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-4]

Evert,

You did not spot the Firmware Notes entry in the Errata sheet.  That
calibration method is not yet implemented.  Use one of the other methods
for the time being.

73,
Don W3FPR

Evert Bakker (PA2KW) wrote:

> Good day to all,
>
> First of all:
>
> K3 (812) arrived.
> Ordered 21 Nov 2007
> Order confirmation 22 april
> Sent 24 april
> Arrived 28 april
> Let's see if reality meets expectations....(I'll let you know)
>
>
> I've finished the building procedure and in the process of calibration.
> When calibrating the TCXO (1 ppm) you are told to locate CONFIG:REF CAL
> menu.
> No problem so far. The next sentence tells me to tap [1] to change the name
> to REF xxC. I'm tapping [1], but I'm getting the message "b set".
> What am I doing wrong here? (see page 47 right column at the bottom of the
> owners manual)
>
> Thanks for replying in advance.
>
> 73's, Evert PA2KW
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>  

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[AC7AC]

CONTENTS DELETED

The author has deleted this message.

[Evert Bakker (PA2KW)]

Thanks to all who responded!
Problem solved, K3 running (10W)

73's, Evert PA2KW

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Evert Bakker (PA2KW)
Sent: Thursday, May 01, 2008 13:10
To: 'Elecraft Reflector'
Subject: [Elecraft] K3 TCXO calibration


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com