K3S: CW and Digital Interface

[Richard Thorne-4]

When I had a K3 I used a Microham microKeyer II to handle CW and RTTY.

I went with another manufacturers rig for the last couple years and I'm
now back to  a K3S.

What is the recommended interface these days?  A winkeyer for cw and
AFSK via the built in sound card or.....

Thanks

Rich - N5ZC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Barry LaZar]

Rich,
     Yes, a Winkeyer and AFSK using the K3s's built in sound card seems
to really work well. I've had no problems using this set up, and I
believe that the additional filtering in the K3s when using AFSK does
help. N1MM macros seem to like the Winkeyer and requires nothing special
to make play other than just setting it up.

73,
K3NDM
Barry

------ Original Message ------
From: "Richard Thorne" <[hidden email]>
To: "Elecraft Reflector" <[hidden email]>
Sent: 5/28/2019 7:54:42 PM
Subject: [Elecraft] K3S: CW and Digital Interface

>When I had a K3 I used a Microham microKeyer II to handle CW and RTTY.
>
>I went with another manufacturers rig for the last couple years and I'm now back to  a K3S.
>
>What is the recommended interface these days?  A winkeyer for cw and AFSK via the built in sound card or.....
>
>Thanks
>
>Rich - N5ZC
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jim - N4ST]

If you have the Winkeyer, just connect that to the key input of the K3S.
The sound card is not involved.

______________
73,
Jim - N4ST

-----Original Message-----
From: [hidden email] <[hidden email]> On Behalf Of Richard Thorne
Sent: Tuesday, May 28, 2019 19:55
To: Elecraft Reflector <[hidden email]>
Subject: [Elecraft] K3S: CW and Digital Interface

When I had a K3 I used a Microham microKeyer II to handle CW and RTTY.

I went with another manufacturers rig for the last couple years and I'm now back to  a K3S.

What is the recommended interface these days?  A winkeyer for cw and AFSK via the built in sound card or.....

Thanks

Rich - N5ZC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html