K3S - Fldigi - macMini
Locked
 
|
Greetings Everyone & HNY,
I am having problems setting up Fldigi with a new macMini & my K3S. I receives signals, but I cannot transmit. I have no problems using WSJT-X. Any help, on or off list, would be most appreciated. 73, Jeff/wb0m ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Are you using FLRIG or HAMLIB for rig control? I and from what I understand others have problems with FLRIG. But quite different from your problem, FLRIG continuously sets transmit on my KX3. I suggest you try HAMLIB for rig control. I know it is not as full featured as FLRIG, but appears to be a lot more stable. Yes I know there is a lot of difference in the interface between the KX3 and your K3s. I use a signalink for my audio CODEC and your K3s has it built in. If you are receiving audio then you probably have FLDIGI pointed to the proper sound CODEC. As long as you have selected both for transmit and recieve. Make sure your rig control software in FLDIGI is set up properly to control PTT. I might suggest reviewing NBEMS videos on youtube. They go through in depth detail for setup. I am on my phone, I will later send you the URL for YouTube videos, when I get on my computer. The setup can be a little overwhelming. I use the videos as I go through every setup. Not to say I don't have setup problems, but those videos have solved all my problems. Good Luck and let me know how it works out. 73, Charlie, N2PKW
Sent via the Samsung GALAXY S®4, an AT&T 4G LTE smartphone -------- Original message -------- From: [hidden email] Date: 12/28/2020 9:04 PM (GMT-06:00) To: [hidden email] Subject: [EXT]: [Elecraft] K3S - Fldigi - macMini Greetings Everyone & HNY, I am having problems setting up Fldigi with a new macMini & my K3S. I receives signals, but I cannot transmit. I have no problems using WSJT-X. Any help, on or off list, would be most appreciated. 73, Jeff/wb0m ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by wb0m@flashdog.us
As a follow up to my last email, I have successfully interfaced my K3 with upgraded USB, my KX3, and a portable which will go unnamed rig to the Raspberry Pi 4B. These rigs are set up as go kits for emergency comms. I live on the Gulf Coast. I did have problems and used the NBEMS videos to complete my configuration setups. The software in my humble opinion is not user friendly. Again good luck and let me know how you make out. 73, Charlie, N2PKW
Sent via the Samsung GALAXY S®4, an AT&T 4G LTE smartphone -------- Original message -------- From: [hidden email] Date: 12/28/2020 9:04 PM (GMT-06:00) To: [hidden email] Subject: [EXT]: [Elecraft] K3S - Fldigi - macMini Greetings Everyone & HNY, I am having problems setting up Fldigi with a new macMini & my K3S. I receives signals, but I cannot transmit. I have no problems using WSJT-X. Any help, on or off list, would be most appreciated. 73, Jeff/wb0m ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by wb0m@flashdog.us
On Mon, Dec 28, 2020 at 09:01:31PM -0600, [hidden email] wrote:
> Greetings Everyone & HNY, > > I am having problems setting up Fldigi with a new macMini & my K3S. I receives signals, but I cannot transmit. I have no problems using WSJT-X. > Any help, on or off list, would be most appreciated. Is this using that new Apple Silicon or is it using an Intel CPU? I ask because from what I've read, Apple runs Intel code through an interpreter in order for it to work on their custom CPUs. I wonder if some of the instructions in Fldigi aren't being translated correctly. Sorry that I don't have a solution, but it's something worth thinking about. Heck, maybe you just need to compile it yourself on the Mini? -- Put your Nose to the Grindstone! -- Amalgamated Plastic Surgeons and Toolmakers, Ltd. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |