K3S - Set Mode Across All Bands?

[MaverickNH]

If I want to apply CW Mode and configuration settings across all bands,
rather than each band individually, is there a way to do that?

BRET/N4SRN



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Bret,

No way that I know of, Mode is a per band setting.

73,
Don W3FPR

On 12/27/2020 1:17 PM, MaverickNH wrote:
> If I want to apply CW Mode and configuration settings across all bands,
> rather than each band individually, is there a way to do that?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[MaverickNH]

OK - thanks!

Bret




-----Original Message-----

From: [hidden email]
To: [hidden email], [hidden email]
Sent: 2020-12-28 11:49:24 AM
Subject: Re: [Elecraft] K3S - Set Mode Across All Bands?

Bret,

No way that I know of, Mode is a per band setting.

73,
Don W3FPR

On 12/27/2020 1:17 PM, MaverickNH wrote:
> If I want to apply CW Mode and configuration settings across all bands,
> rather than each band individually, is there a way to do that?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

Bret
One way would be to use a Genovation keypad and program the band info into each key as needed

73,
Harlan K4HES

Sent from my iPhone

> On Dec 28, 2020, at 11:51 AM, Don Wilhelm <[hidden email]> wrote:
>
> Bret,
>
> No way that I know of, Mode is a per band setting.
>
> 73,
> Don W3FPR
>
>> On 12/27/2020 1:17 PM, MaverickNH wrote:
>> If I want to apply CW Mode and configuration settings across all bands,
>> rather than each band individually, is there a way to do that?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[NK7Z]

See:
https://www.nk7z.net/adding-external-keypad-k3/

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 12/28/20 10:48 AM, Harlan Sherriff via Elecraft wrote:

> Bret
> One way would be to use a Genovation keypad and program the band info into each key as needed
>
> 73,
> Harlan K4HES
>
> Sent from my iPhone
>
>> On Dec 28, 2020, at 11:51 AM, Don Wilhelm <[hidden email]> wrote:
>>
>> Bret,
>>
>> No way that I know of, Mode is a per band setting.
>>
>> 73,
>> Don W3FPR
>>
>>> On 12/27/2020 1:17 PM, MaverickNH wrote:
>>> If I want to apply CW Mode and configuration settings across all bands,
>>> rather than each band individually, is there a way to do that?
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[K8TE]

While it might take as long as a minute, I have each of the M1-M4 memories
programmed for for modes and frequencies by band, one of them being a CW and
SSB frequency for County Hunters on each band.  I used the Elecraft
Frequency Memory Editor to accomplish this.

Now, I can start at 160m, hit the M>V button, then M1, and very quickly have
the CW frequency in VFO A and the SSB frequency in VFO B for each band.

With a little thought and organization, the Frequency Editor is a handy tool
for such things as using a segment for contest frequencies, SOTA, CH, etc.
Those Elecraft designers are whitty!

You can do something similar with most logging programs and especially the
Win4K3Suite.

73, Bill, K8TE



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]