K3S USB port question

[Jim Sheldon]

Can the K3 be controlled using RS-232 via the RJ-45 while simultaneously
using the USB connection for it's sound card functions?  I didn't find a
difinitive answer in the books.  If it can do this, I won't have to
re-configure all my software and it would save me a bunch of time - LOL.

Jim Sheldon, W0EB

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Lyle Johnson]

Yes.  Set the RS232 menu item to the speed you want.  If it is not in
USB in that menu, then it is using the regular RS232 port.

To use the USB audio for Tx, be sure no cable is plugged into the analog
LINE IN jack.

73,

Lyle KK7P

> Can the K3 be controlled using RS-232 via the RJ-45 while
> simultaneously using the USB connection for it's sound card functions?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim Sheldon]

Thanks Lyle,
I thought that was the way it should work, but I couldn't find it in the
books (not sure if I overlooked it or might be something that needs to
be added).  Anyway that saves me a whole lot of shack re-wiring and I'll
be able to run two instances of MMTTY for SPLIT copy of the 2nd RX.

Also gets the HUGE HAL ST-8000A off the desk and frees up a bunch of
room on the monitor shelf.

73,
Jim, W0EB

------ Original Message ------
From: "Lyle Johnson" <[hidden email]>
To: [hidden email]
Sent: 3/2/2016 12:36:11 PM
Subject: Re: [Elecraft] K3S USB port question

>Yes.  Set the RS232 menu item to the speed you want.  If it is not in
>USB in that menu, then it is using the regular RS232 port.
>
>To use the USB audio for Tx, be sure no cable is plugged into the
>analog LINE IN jack.
>
>73,
>
>Lyle KK7P
>
>>Can the K3 be controlled using RS-232 via the RJ-45 while
>>simultaneously using the USB connection for it's sound card functions?
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jerry Moore]

If I understand what you mean to ask the answer is yes.
You can do CAT control AND audio in/out via K3S USB at the same time.
Don't connect anything to the DB connector. It is NOT a standard serial
connection

Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.


-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Jim
Sheldon
Sent: Wednesday, March 02, 2016 1:08 PM
To: Elecraft Mailing List
Subject: [Elecraft] K3S USB port question

Can the K3 be controlled using RS-232 via the RJ-45 while simultaneously
using the USB connection for it's sound card functions?  I didn't find a
difinitive answer in the books.  If it can do this, I won't have to
re-configure all my software and it would save me a bunch of time - LOL.

Jim Sheldon, W0EB

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]