K3S height with stand extended?

[ae4pb]

Hi All,
  I'm designing a hutch for my operating desk and would like to know the
height of the K3S with the stand extended. The 4" dimension given for the
rig appears to be with the stand folded.

Thanks in advance.
Jerry Moore
AE4PB, K3S SN# I should know Sunday when the big brown truck (BBT) arrives
with my setup.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[wayne burdick]

6.25" with the stand deployed, and about 4.5" with the stand folded against the case.

Wayne
N6KR


On Sep 12, 2015, at 1:32 PM, <[hidden email]> wrote:

> Hi All,
>  I'm designing a hutch for my operating desk and would like to know the
> height of the K3S with the stand extended. The 4" dimension given for the
> rig appears to be with the stand folded.
>
> Thanks in advance.
> Jerry Moore

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jerry Moore]

Thank you.
   Any idea how much space I need between the top of the rig and the bottom
of the hutch to be able to get Rose's dust covers on?

Thanks.. I need to look at my dimensions a bit.

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Wayne
Burdick
Sent: Saturday, September 12, 2015 4:37 PM
To: [hidden email]
Cc: [hidden email]
Subject: Re: [Elecraft] K3S height with stand extended?

6.25" with the stand deployed, and about 4.5" with the stand folded against
the case.

Wayne
N6KR


On Sep 12, 2015, at 1:32 PM, <[hidden email]> wrote:

> Hi All,
>  I'm designing a hutch for my operating desk and would like to know
> the height of the K3S with the stand extended. The 4" dimension given
> for the rig appears to be with the stand folded.
>
> Thanks in advance.
> Jerry Moore

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ae4pb]

Thank you.
   Any idea how much space I need between the top of the rig and the bottom
of the hutch to be able to get Rose's dust covers on?

Thanks.. I need to look at my dimensions a bit.

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Wayne
Burdick
Sent: Saturday, September 12, 2015 4:37 PM
To: [hidden email]
Cc: [hidden email]
Subject: Re: [Elecraft] K3S height with stand extended?

6.25" with the stand deployed, and about 4.5" with the stand folded against
the case.

Wayne
N6KR


On Sep 12, 2015, at 1:32 PM, <[hidden email]> wrote:

> Hi All,
>  I'm designing a hutch for my operating desk and would like to know
> the height of the K3S with the stand extended. The 4" dimension given
> for the rig appears to be with the stand folded.
>
> Thanks in advance.
> Jerry Moore

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

Mine measures 6. 375" at the highest point.

73
Bob, K4TAX
K3S s/n 10,163

On 9/12/2015 3:32 PM, [hidden email] wrote:

> Hi All,
>    I'm designing a hutch for my operating desk and would like to know the
> height of the K3S with the stand extended. The 4" dimension given for the
> rig appears to be with the stand folded.
>
> Thanks in advance.
> Jerry Moore
> AE4PB, K3S SN# I should know Sunday when the big brown truck (BBT) arrives
> with my setup.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>    
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Jer,

If you are thinking of putting the cover on without moving the K3S or
collapsing the tilt stand, I would allow an additional 1/2 to 1 inch -
that allows the rear seam of the cover space to be manipulated.
OTOH, if you will be moving the K3S out, putting the cover on and then
pushing it back in place, I would think 1/4 inch additional would be
sufficient.

73,
Don W3FPR

On 9/12/2015 5:03 PM, [hidden email] wrote:
> Thank you.
>     Any idea how much space I need between the top of the rig and the bottom
> of the hutch to be able to get Rose's dust covers on?
>
> Thanks.. I need to look at my dimensions a bit.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Fred Townsend-2]

Was that measured top to bottom or bottom to top?

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Wayne
Burdick
Sent: Saturday, September 12, 2015 1:37 PM
To: [hidden email]
Cc: [hidden email]
Subject: Re: [Elecraft] K3S height with stand extended?

6.25" with the stand deployed, and about 4.5" with the stand folded against
the case.

Wayne
N6KR


On Sep 12, 2015, at 1:32 PM, <[hidden email]> wrote:

> Hi All,
>  I'm designing a hutch for my operating desk and would like to know
> the height of the K3S with the stand extended. The 4" dimension given
> for the rig appears to be with the stand folded.
>
> Thanks in advance.
> Jerry Moore

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

In my case, with the stand deployed,  I measured 6.375" from the desk
top to the upper most front corner of the radio.


73
Bob, K4TAX
K3S s/n 10,163

On 9/12/2015 4:33 PM, Fred Townsend wrote:

> Was that measured top to bottom or bottom to top?
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of Wayne
> Burdick
> Sent: Saturday, September 12, 2015 1:37 PM
> To: [hidden email]
> Cc: [hidden email]
> Subject: Re: [Elecraft] K3S height with stand extended?
>
> 6.25" with the stand deployed, and about 4.5" with the stand folded against
> the case.
>
> Wayne
> N6KR
>
>
> On Sep 12, 2015, at 1:32 PM, <[hidden email]> wrote:
>
>> Hi All,
>>   I'm designing a hutch for my operating desk and would like to know
>> the height of the K3S with the stand extended. The 4" dimension given
>> for the rig appears to be with the stand folded.
>>
>> Thanks in advance.
>> Jerry Moore
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]