KAT100 & K2

[dave.wilburn]

Just starting to get motivated again after building the K2.  Have the
KPA100, and KAT100 here.  I decided to build the KAT100 now, and come
back to the amp.  It says in the front of the manual that it will work
with the basic K2.  Just wanted to confirm, and make sure that was the
case, or if I needed anything extra to make it work.  I do not have any
of the extra boards at this time, just the basic K2.  Thanks.
--

David Wilburn
[hidden email]
K4DGW
K2 #5982
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Tom Arntzen-2]

Hi David!
In the basic K2 you need the KIO2 to interface the K2 with the KAT100.
That interface is a part of KPA100 , so in your case I would build the
KPA100 first.
That will give you the opportunity to test all aspects of the KAT100.
You will be able to see how it switch between ho/lo power settings eg.
10watts is the triggerpoint.

73 de LA1PHA

----- Original Message -----
From: "David Wilburn" <[hidden email]>
To: "Elecraft Discussion List" <[hidden email]>
Sent: Sunday, April 01, 2007 2:24 AM
Subject: [Elecraft] KAT100 & K2

> Just starting to get motivated again after building the K2.  Have the
> KPA100, and KAT100 here.  I decided to build the KAT100 now, and come back
> to the amp.  It says in the front of the manual that it will work with the
> basic K2.  Just wanted to confirm, and make sure that was the case, or if
> I needed anything extra to make it work.  I do not have any of the extra
> boards at this time, just the basic K2.  Thanks.
> --
>
> David Wilburn
> [hidden email]
> K4DGW
> K2 #5982
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.23/740 - Release Date:
> 30.03.2007 13:15
>
>

--------------------------------------------------------------------------------
Jeg bruker gratisversjonen av SPAMfighter.
Den har inntil videre fjernet 73 spamposter.
Privatbrukere får SPAMfighter gratis!
Prøv gratis SPAMfighter PRO her.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

> Just starting to get motivated again after building the K2.  Have the
> KPA100, and KAT100 here.  I decided to build the KAT100 now...
 > I do not have any
> of the extra boards at this time, just the basic K2.  Thanks.

You'll need the KIO2, or the KPA100, to use the KAT100.  It needs to be
connected to the auxbus in the K2, and these are the Elecrfat-supplied
ways of getting to the auxbus.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[dave.wilburn]

Thanks to everyone for the quick reply.  I figured the KIO2 was going to
be the problem.  No big deal, I just finished sorting the parts for the
KAT100, I'll go ahead and build it, then set it aside till I do the KPA.
  No hurry.  Thanks again.

David Wilburn
[hidden email]
K4DGW
K2 #5982


Lyle Johnson wrote:

>> Just starting to get motivated again after building the K2.  Have the
>> KPA100, and KAT100 here.  I decided to build the KAT100 now...
>  > I do not have any
>> of the extra boards at this time, just the basic K2.  Thanks.
>
> You'll need the KIO2, or the KPA100, to use the KAT100.  It needs to be
> connected to the auxbus in the K2, and these are the Elecrfat-supplied
> ways of getting to the auxbus.
>
> 73,
>
> Lyle KK7P
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com