KAT500??

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

KAT500??

Fred Bennett  N9TA-2
  So....what the heck has happened to the KAT500?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

wayne burdick
Administrator
We revised the PCB one more time to make it easier to manufacture.  
Should have these "final" (we hope) boards in by next week. If all  
goes well, we'll be down to one final impediment: me. I have to revise  
the sheet metal drawings.

Sorry for the delay.

Wayne


On Mar 8, 2012, at 2:48 PM, Fred Bennett N9TA wrote:

>  So....what the heck has happened to the KAT500?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

Don Wilhelm-4
In reply to this post by Fred Bennett N9TA-2
Patience is a virtue!

I recall on a long plane trip between North Carolina and California, the
XYL was getting restless from being in the same cramped plane seat for
so many hours - I finally wrote "patience" in very small letters on a
small piece of paper and handed it to her with the words "now you have a
little patience"!

73,
Don W3FPR

On 3/8/2012 5:48 PM, Fred Bennett N9TA wrote:

>    So....what the heck has happened to the KAT500?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

Fred Bennett  N9TA-2
In reply to this post by wayne burdick
Have you any idea of pricing? And will it be kit or assembled?
And thanks for the info....this IS me being patient. With my
antennas I can use the KPA500 on small bits of only three bands!

73
____________________________________________

-----Original Message-----
From: Wayne Burdick [mailto:[hidden email]]
Sent: Thursday, March 08, 2012 6:01 PM
To: Fred Bennett N9TA
Cc: [hidden email]
Subject: Re: [Elecraft] KAT500??

We revised the PCB one more time to make it easier to manufacture.  
Should have these "final" (we hope) boards in by next week. If all  
goes well, we'll be down to one final impediment: me. I have to revise  
the sheet metal drawings.

Sorry for the delay.

Wayne


On Mar 8, 2012, at 2:48 PM, Fred Bennett N9TA wrote:

>  So....what the heck has happened to the KAT500?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

Mike Reublin
In reply to this post by Don Wilhelm-4
How long was your hospitalization?

73, Mike NF4L

On 3/8/2012 6:01 PM, Don Wilhelm wrote:

> Patience is a virtue!
>
> I recall on a long plane trip between North Carolina and California, the
> XYL was getting restless from being in the same cramped plane seat for
> so many hours - I finally wrote "patience" in very small letters on a
> small piece of paper and handed it to her with the words "now you have a
> little patience"!
>
> 73,
> Don W3FPR
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

KE8G
In reply to this post by wayne burdick
Wayne,
I, for one, would rather wait and know I am getting the best that Elecraft
can offer; design, component, & price wise.

I've seen too many jobs/products rushed into to meet the market demand, only
to have problems down the road and end up doing a re-design.

73 de Jim - KE8G


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Wayne Burdick
Sent: Thursday, March 08, 2012 6:01 PM
To: Fred Bennett N9TA
Cc: [hidden email]
Subject: Re: [Elecraft] KAT500??

We revised the PCB one more time to make it easier to manufacture.  
Should have these "final" (we hope) boards in by next week. If all goes
well, we'll be down to one final impediment: me. I have to revise the sheet
metal drawings.

Sorry for the delay.

Wayne


On Mar 8, 2012, at 2:48 PM, Fred Bennett N9TA wrote:

>  So....what the heck has happened to the KAT500?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

Joe K2UF
In reply to this post by wayne burdick
Thanks Wayne.  Information is therapeutic. Helps to relieve anxiety.  We are
a fragile lot.

73 Joe K2UF

No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Wayne Burdick
Sent: Thursday, March 08, 2012 6:01 PM
To: Fred Bennett N9TA
Cc: [hidden email]
Subject: Re: [Elecraft] KAT500??

We revised the PCB one more time to make it easier to manufacture.  
Should have these "final" (we hope) boards in by next week. If all  
goes well, we'll be down to one final impediment: me. I have to revise  
the sheet metal drawings.

Sorry for the delay.

Wayne


On Mar 8, 2012, at 2:48 PM, Fred Bennett N9TA wrote:

>  So....what the heck has happened to the KAT500?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

Phil Hystad-3
In reply to this post by wayne burdick
Don't let the KAT500 cut into your on-air time!


On Mar 8, 2012, at 3:00 PM, Wayne Burdick wrote:

> We revised the PCB one more time to make it easier to manufacture.  
> Should have these "final" (we hope) boards in by next week. If all  
> goes well, we'll be down to one final impediment: me. I have to revise  
> the sheet metal drawings.
>
> Sorry for the delay.
>
> Wayne
>
>
> On Mar 8, 2012, at 2:48 PM, Fred Bennett N9TA wrote:
>
>> So....what the heck has happened to the KAT500?
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

wayne burdick
Administrator
Phil Hystad wrote:

> Don't let the KAT500 cut into your on-air time!

Don't worry. I'm averaging a blistering one QSO per day right now.

A couple of days ago I worked ZS1JX on 7.001 using the KX3. I was  
running 12 watts to a random wire antenna just a few feet off the  
roof, but we had a solid, 5-minute QSO. Doesn't get much better than  
this!

Wayne
N6KR


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

Phil Hystad-3
Pretty good catch on 12 watts.  I just checked my log book, no entries for yesterday and the day before.  Been busy so I am going to go find someone on 40 meters -- maybe around 7.030 or so.  

phil, K7PEH


On Mar 8, 2012, at 5:55 PM, Wayne Burdick wrote:

> Phil Hystad wrote:
>
>> Don't let the KAT500 cut into your on-air time!
>
> Don't worry. I'm averaging a blistering one QSO per day right now.
>
> A couple of days ago I worked ZS1JX on 7.001 using the KX3. I was running 12 watts to a random wire antenna just a few feet off the roof, but we had a solid, 5-minute QSO. Doesn't get much better than this!
>
> Wayne
> N6KR
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

K2 QRP QSOs

Michael Mussler
In reply to this post by wayne burdick
I took my K2 along on a recent cross country ski trip to a century old log
cabin located north of Steamboat Springs. Running 3 watts into a four feet
per side square loop antenna hung from the clothes pegs INSIDE the cabin, I
worked Texas, Idaho and Washington on 30m. There was four feet of snow on
the ground outside the cabin. Now that made my day!
73
Mike, AI8Z



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KAT500??

Vic Rosenthal
In reply to this post by wayne burdick
My guess is that this was about an hour after sunset in California, and just before
sunrise in ZS. I have noticed really good conditions on this path and this time, even with
my low-ish dipole on 40 -- apparently signals arrive at high angles. The opening is pretty
short, so Wayne must have hit it just right. The opening is there on 80, too.

On 3/8/2012 5:55 PM, Wayne Burdick wrote:

> A couple of days ago I worked ZS1JX on 7.001 using the KX3. I was
> running 12 watts to a random wire antenna just a few feet off the
> roof, but we had a solid, 5-minute QSO. Doesn't get much better than
> this!
>
> Wayne
> N6KR
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html