KPA/C50

[Oluf Henriksen]

Working my way through the assembling of the KPA/100 I am unable to find the capacitor C50 in the schematic on page 64/65 in the manual.   Please?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

I cannot find it on the schematic either, but I looked at the board scans on
Tom Hammond's webpage and it looks like it is a bypass on the T SENSE
signal - at least it appears to my eyes as though one side goes to the
ground plane and the other side connects to collector of Q3.  With the
actual circuit board in your hands (instead of the scanned image I was
looking at), you should be able to determine which circuit it actually is
in.

Install it even though it is not included on the schematic. The KPA100 is
know to work fine with it installed.

73,
Don W3FPR

> -----Original Message-----
>
> Working my way through the assembling of the KPA/100 I am unable
> to find the capacitor C50 in the schematic on page 64/65 in the
> manual.   Please?
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ron D'Eau Claire-2]

-----Original Message-----
Working my way through the assembling of the KPA/100 I am unable to find the
capacitor C50 in the schematic on page 64/65 in the manual.   Please?
_
---------------------------------------------------

I think it was left off by accident, Oluf. My version KPA100 from 2002
doesn't have it on the schematic either although it's on the board, and it
doesn't turn up in a PDF search of the most version of the manual either.

Ron AC7AC

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com