KPA100 testing

[Nick G3RWF]

Looking for reassurance please. KPA100 almost complete but testing Q1 and Q2 base to ground - measures 11.5 ohms - just outside the parameters given in the instruction book page 43 (12-16 ohms).
Can't see a problem but wondered whether I should be looking for one.
73 Nick G3RWF
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ron D'Eau Claire-2]

You're FB Nick! The low end of the spec was changed to 11 ohms some time
ago.

If you have a Rev D manual, you missed it when incorporating Errata D-1.
It's incorporated into the text in the Rev E KPA100 manual.

Ron AC7AC

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Nick Henwood
Sent: Friday, May 04, 2007 11:29 PM
To: [hidden email]
Subject: [Elecraft] KPA100 testing


Looking for reassurance please. KPA100 almost complete but testing Q1 and Q2
base to ground - measures 11.5 ohms - just outside the parameters given in
the instruction book page 43 (12-16 ohms). Can't see a problem but wondered
whether I should be looking for one. 73 Nick G3RWF
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jukka Tarvainen-2]

>KPA100 almost complete but testing Q1 and Q2 base to ground - measures 11.5
ohms - just outside the parameters given in the instruction book page 43
(12-16 ohms).


I checked my KPA100 manual. During alignment I have noted 11 ohms for Q1 and
Q2 base to ground. I just went ahead with it. It seems to work OK. Maybe
others can comment what might cause this?

73
Jukka, OH4MFA
K2/100 #4293


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com