"Geez, couldn't have just posted the link?"
Well that's not any better because Elecraft seems to have used a page structure that does not change the URL. Navigate to the page of interest and copy the URL but that URL takes you to the parent page. Not a very clever design.
The update details are:
02.38 12/2/2019
* Bug fix: fan speed was reduced too quickly during cool-down
* Switch to STBY if BAND CHANGE->STBY is enabled and the frequency (from XCVR or TX count) is below the amp's frequency range
* Reduce reflected power fault events when band or ATU settings change
* Reduce turn-off delay when XCVR KEY is used
* Wait longer after band change to inform K3 that KPA1500 has switched to STBY when BANDCHANGE->STBY is YES
* Skip ATU HiSWR retune if the current bin contains only the ATU setting that matches the ATU relays
* Added ^DA command to display current ATU frequency, relay settings, and bypass SWR. Get with ^DA; response is like
^DA10128 AN1 Side TX 280 nH (L05) 571 pF (C36) SWR Bypass 4.0;
* Add Tech Mode FAN SPEED DWELL menu item and ^DW command to set the time fans stay at a given speed after crossing a cool-down temperature threshold.
* Add Tech Mode BOOT BLOCK VERSION menu item and ^BV command to display the boot block firmware version.. ^BV; response is like ^BV01.06;"
Andy, k3wyc
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
