Will the KPA500 put out the full 500 watts on 120VAC wihtout any issues ? Thinking about ordering one real soon but there is no easy way for me to get it on 220. 73 Zack N8FNR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Zack,
Yes it will. Enjoy Gary On 10 August 2011 03:24, <[hidden email]> wrote: > > > Will the KPA500 put out the full 500 watts on 120VAC wihtout any issues ? > Thinking about ordering one real soon but there is no easy way for me to get > it on 220. > > > > 73 > > Zack > > N8FNR > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- VK4FD - Motorhome Mobile Elecraft Equipment K3 #679, KPA-500 #018 Living the dream!!! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by vtnn43e
Easy....Mine does that with very little drive (20-22w) on 117v mains.
73, Bob K5SM On 8/9/2011 12:24 PM, [hidden email] wrote: > > Will the KPA500 put out the full 500 watts on 120VAC wihtout any issues ? Thinking about ordering one real soon but there is no easy way for me to get it on 220. > > > > 73 > > Zack > > N8FNR > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by vtnn43e
Yes easily. I have seen around 700w on 120v. I don't run it that hard
but if the power level is up a bit high it will do it. On 8/9/2011 11:24 AM, [hidden email] wrote: > > Will the KPA500 put out the full 500 watts on 120VAC wihtout any issues ? Thinking about ordering one real soon but there is no easy way for me to get it on 220. > > > > 73 > > Zack > > N8FNR > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Gary Gregory
CONTENTS DELETED
The author has deleted this message.
|
In reply to this post by vtnn43e
Zack and All,
I think you may already have had sufficent confirmation to alleviate your concerns, but I'll add mine just for grins. The KPA500 works beautifully on 120 volts--at least on the rather modest circuit I have it connected to--a 20 amp circuit. That's not what I would prefer, but it's what I have! I can tell you that a couple of other medium power amps don't like this particular hook-up I have, but the KPA500 is apparently extremely efficient. I've had absolutely not circuit breaker issues at all, which has been a problem with other amps. In fact, although I don't run it this hard, I've had it up over 600 watts out, and no problems at that level either. The output is real too, as I have measured it independently from what the amp shows. I hesitate to be too absolute about my conclusion, mainly because I don't know exactly what kind of circuit you have available. However, if it's anything reasonable, I doubt you will have a problem. You'll have to evaluate whether or not you have too many other things hanging off the same circuit. Dave W7AQK ======= Email scanned by PC Tools - No viruses or spyware found. (Email Guard: 7.0.0.18, Virus/Spyware Database: 6.18090) http://www.pctools.com/ ======= ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |