KPA500 and KAT500 with 2 Transceivers

[Reggie]

I have the K3 and and Flex 6500, and I would like to hook both transceivers to the KPA500 and the KAT500.    Is there a device by Elecraft or another manufacturer that would allow me to accomplish it?

73, Reggie N3OP  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Mike K2MK]

Hi Reggie,

This device could start you off in the right direction. I have no personal experience with it.

http://www.qth.com/topten/abss.htm

73,
Mike K2MK

Reggie wrote

I have the K3 and and Flex 6500, and I would like to hook both transceivers to the KPA500 and the KAT500.    Is there a device by Elecraft or another manufacturer that would allow me to accomplish it?

73, Reggie N3OP  

[Jim Brown-10]

On 8/4/2014 9:34 AM, Reggie wrote:
> Is there a device by Elecraft or another manufacturer that would allow me to accomplish it?

I'm using a pair of Top Ten Devices RF relay boxes to switch a K3
between a KPA500 and a Ten Tec Titan amp -- one box on the input, a
second on the output. For your application, a single box would work. The
boxes use a pair of relays with 12VDC coils.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]