KPA500 fan

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

KPA500 fan

Bill-3
On the subject of quieter fans, any thoughts on a quieter fan for the
amp? I do a lot of AM and a quieter fan would be nice - else the amp
will get relocated to a different location in the shack.

Bill W2BLC K-Line

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA500 fan

Elecraft mailing list
I think about the only real solution for the fan noise on the KPA500 is to remote it.





      From: Bill <[hidden email]>
 To: [hidden email]
 Sent: Saturday, February 11, 2017 7:46 PM
 Subject: [Elecraft] KPA500 fan
   
On the subject of quieter fans, any thoughts on a quieter fan for the
amp? I do a lot of AM and a quieter fan would be nice - else the amp
will get relocated to a different location in the shack.

Bill W2BLC K-Line

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]


   
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA500 fan

Bruce Beford-5
In reply to this post by Bill-3
Bill,

Have you considered (or already done) setting the minimum fan speed to 2 (or
3)? Doing this helps delay the onset of higher fan speeds. Of course, long
duration AM transmissions this may not help, but I have notice it help on
lower duty-cycle modes.

73,

Bruce, N1RX

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]