KPA500 not working

[VE3NFK]

My KPA500 has been working - but had the intermittent hum issue;

I took it apart; checked the nut tension; checked I had used the yellow wire;
reassembled (including the lock-out switch - at least it was all there)
and now it won't transmit.

Gets the pa key  as an asterix shows up to the left of the frequency;
it follows the K3; the K3 is fine;  The K3 reports it on/off/standby etc.

Heeeellllpp  :-)

thanks  73  
John VE3NFK

[VE3NFK]

 now working   - after removing everything and starting over; it is ok

thanks to  Rick wa6nhc/7  for his help

73 John VE3NFK

[VE3NFK]

 now working   - after removing everything and starting over; it is ok

thanks to  Rick wa6nhc/7  for his help

73 John VE3NFK

[mcduffie]

On Sat, 20 Apr 2013 12:34:18 -0700 (PDT), VE3NFK wrote:

> now working   - after removing everything and starting over; it is ok

But you don't say what fixed it.  :o(

Gary
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[VE3NFK]

sorry Gary

  - would be very happy to tell you if I knew :-)  
took it out; took cover off; looked; put cover on; reconnected and it worked like it should have.  
The cutout was ok before and after.

73 John VE3NFK