KRX3 Inventory Question: "Foam Pads"

[Jeffrey Maass]

 
I have just inventoried my KRX3 box preparatory to
installing it into the K3.

All the items on the inventory appear to be as needed,
except in the D850334 "KRX3 Hardware Bag".

I do not have anything labeled E850324, "Foam Pads".
>From the photo, this appears to include two foam
strips.

What I have instead is an envelope labeled as E980148,
which contains one foam strip.

Am I headed for a delay, or is only one pad required?


73,  Jeff  K8ND
 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ken Kopp-3]

Hi Jeff, others ...

Only one foam strip in my kit, and it works fine.
Just stick it across the center of the rear of the
speaker's magnet.

73! Ken Kopp - K0PP
     [hidden email]

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Arie Kleingeld PA3A-2]

Jeff,

I had the same. I cut the strip in two, lengthwise --> et presto - two
strips.

73
Arie PA3A

---------------

What I have instead is an envelope labeled as E980148,
which contains one foam strip.

Am I headed for a delay, or is only one pad required?


73,  Jeff  K8ND
 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Robert Dorchuck]

I have the Speaker Pad #E980148 but it is a circular foam pad.

 

My main RF Board also has a red sticker with a couple X's

pasted between the FL1 and FL2 slot.  Anyone else have this??

 

I worry about red stickers with X's.

 

Happy New Year.

 

Bob  W6VY

 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[N2TK]

Hi Bob,

I had the same thing on my KRX3 board. The KRX3 works fine so didn't think too much about it. But it made me pause before installing it. One "X" is bad but "XX" ??? :-)

 

HNY

N2TK, Tony

---

From: [hidden email] [mailto:[hidden email]] On Behalf Of Robert Dorchuck
Sent: Thursday, January 01, 2009 6:48 PM
To: [hidden email]
Subject: [Elecraft] RE: KRX3 Inventory Question: "Foam Pads"

I have the Speaker Pad #E980148 but it is a circular foam pad.

 

My main RF Board also has a red sticker with a couple X's

pasted between the FL1 and FL2 slot.  Anyone else have this??

 

I worry about red stickers with X's.

 

Happy New Year.

 

Bob  W6VY

 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[AC7AC]

CONTENTS DELETED

The author has deleted this message.