KSB2 Parts ID

[k6dgw]

I'm starting to build the SSB adapter for my K2 (#4398), and I have a
parts ID question:

I appear to be missing RP3 and RP5 as listed in the parts list, but I
have two 6-pin RP's labelled "CTSK 045161473" and "6X-2-202 B02242" yet
to be accounted for.  I strongly suspect these are my missing RP's ... true?

Fred K6DGW
Auburn CA CM98lw


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Tom Hammond-3]

Fred:

At 10:24 PM 6/20/2005, you wrote:
>I'm starting to build the SSB adapter for my K2 (#4398), and I have a
>parts ID question:
>
>I appear to be missing RP3 and RP5 as listed in the parts list, but I have
>two 6-pin RP's labelled "CTSK 045161473" and "6X-2-202 B02242" yet to be
>accounted for.  I strongly suspect these are my missing RP's ... true?

Important parts of those numbers... (I suspect anyway)

>CTSK 045161473

Important numbers... "473" = 47K

>6X-2-202 B02242

Important numbers... "242" = 2.4K

If those values match, then you're good to go.

73,

Tom   N0SS


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Matt Osborn]

Fred,

Those are the same parts I had with my KSB2.  The "CTSK 045161473" is
called out in the parts list as "61473" for RP5. The '6X-2-202 B02242"
part I used for RP3, trusting that the only part left was the correct
part.

The KDSB seems to work, but I've never used one before, so what do I
know.

I'll watch this space for further info...


On Mon, 20 Jun 2005 20:24:00 -0700, Fred Jensen <[hidden email]>
wrote:

>I'm starting to build the SSB adapter for my K2 (#4398), and I have a
>parts ID question:
>
>I appear to be missing RP3 and RP5 as listed in the parts list, but I
>have two 6-pin RP's labelled "CTSK 045161473" and "6X-2-202 B02242" yet
>to be accounted for.  I strongly suspect these are my missing RP's ... true?
>
>Fred K6DGW
>Auburn CA CM98lw
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com