KX2: Is it possible to clear the clock with a command on the interface?

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

KX2: Is it possible to clear the clock with a command on the interface?

KK1L
Folks,

Wondering if it is possible to send a command to clear the clock on the KX2.
I am considering using a macros to set the time, but the menu only allows
up/down jof the HH, MM, SS; rather than setting an actual value. If I could
clear the clock to zero I could also set the time. I have looked through the
command set pretty well and think the answer is "no", but figured I would
ask.

thanks.

73 es God Bless, KK1L Ron <><



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX2: Is it possible to clear the clock with a command on the interface?

Grant Youngman-2
You can set the tine from the KX2 utility ….

> On Apr 8, 2020, at 7:41 PM, KK1L <[hidden email]> wrote:
>
> Folks,
>
> Wondering if it is possible to send a command to clear the clock on the KX2.
> I am considering using a macros to set the time, but the menu only allows
> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
> clear the clock to zero I could also set the time. I have looked through the
> command set pretty well and think the answer is "no", but figured I would
> ask.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX2: Is it possible to clear the clock with a command on the interface?

KK1L
I did not find a direct set for the clock. I know about the MN074;
command to bring up the clock and then UP;/DN; to change the hour or min
or sec from whatever it happens to be. Setting the time automatically
would have to start from a known state.

73 es God Bless de KK1L...Ron Rossi ([hidden email]) <><
QTH: Jericho, Vermont
My page: http://kk1l.com

On 4/8/2020 19:45, Grant Youngman wrote:

> You can set the tine from the KX2 utility ….
>
>> On Apr 8, 2020, at 7:41 PM, KK1L <[hidden email]> wrote:
>>
>> Folks,
>>
>> Wondering if it is possible to send a command to clear the clock on the KX2.
>> I am considering using a macros to set the time, but the menu only allows
>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
>> clear the clock to zero I could also set the time. I have looked through the
>> command set pretty well and think the answer is "no", but figured I would
>> ask.
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX2: Is it possible to clear the clock with a command on the interface?

Grant Youngman-2
It is not a macro.  It’s under the Configuration tab of the KX2 Utility …. it will set the KX2 tie to your computer time.

Grant NQ5T

> On Apr 8, 2020, at 7:56 PM, Ron Rossi <[hidden email]> wrote:
>
> I did not find a direct set for the clock. I know about the MN074; command to bring up the clock and then UP;/DN; to change the hour or min or sec from whatever it happens to be. Setting the time automatically would have to start from a known state.
>
> 73 es God Bless de KK1L...Ron Rossi ([hidden email]) <><
> QTH: Jericho, Vermont
> My page: http://kk1l.com
>
> On 4/8/2020 19:45, Grant Youngman wrote:
>> You can set the tine from the KX2 utility ….
>>
>>> On Apr 8, 2020, at 7:41 PM, KK1L <[hidden email]> wrote:
>>>
>>> Folks,
>>>
>>> Wondering if it is possible to send a command to clear the clock on the KX2.
>>> I am considering using a macros to set the time, but the menu only allows
>>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
>>> clear the clock to zero I could also set the time. I have looked through the
>>> command set pretty well and think the answer is "no", but figured I would
>>> ask.
>>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX2: Is it possible to clear the clock with a command on the interface?

KK1L
I just noticed that. It is greyed out for me. No option to click it.

73 es God Bless de KK1L...Ron Rossi ([hidden email]) <><
QTH: Jericho, Vermont
My page: http://kk1l.com

On 4/8/2020 20:00, Grant Youngman wrote:

> It is not a macro.  It’s under the Configuration tab of the KX2 Utility …. it will set the KX2 tie to your computer time.
>
> Grant NQ5T
>
>> On Apr 8, 2020, at 7:56 PM, Ron Rossi <[hidden email]> wrote:
>>
>> I did not find a direct set for the clock. I know about the MN074; command to bring up the clock and then UP;/DN; to change the hour or min or sec from whatever it happens to be. Setting the time automatically would have to start from a known state.
>>
>> 73 es God Bless de KK1L...Ron Rossi ([hidden email]) <><
>> QTH: Jericho, Vermont
>> My page: http://kk1l.com
>>
>> On 4/8/2020 19:45, Grant Youngman wrote:
>>> You can set the tine from the KX2 utility ….
>>>
>>>> On Apr 8, 2020, at 7:41 PM, KK1L <[hidden email]> wrote:
>>>>
>>>> Folks,
>>>>
>>>> Wondering if it is possible to send a command to clear the clock on the KX2.
>>>> I am considering using a macros to set the time, but the menu only allows
>>>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
>>>> clear the clock to zero I could also set the time. I have looked through the
>>>> command set pretty well and think the answer is "no", but figured I would
>>>> ask.
>>>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX2: Is it possible to clear the clock with a command on the interface?

Grant Youngman-2
Are you sure you have a connection to the radio that’s working?

> On Apr 8, 2020, at 8:21 PM, Ron Rossi <[hidden email]> wrote:
>
> I just noticed that. It is greyed out for me. No option to click it.
>
> 73 es God Bless de KK1L...Ron Rossi ([hidden email]) <><
> QTH: Jericho, Vermont
> My page: http://kk1l.com
>
> On 4/8/2020 20:00, Grant Youngman wrote:
>> It is not a macro.  It’s under the Configuration tab of the KX2 Utility …. it will set the KX2 tie to your computer time.
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX2: Is it possible to clear the clock with a command on the interface?

Nr4c
In reply to this post by KK1L
Doesn’t the KX2 Utility have a function to set the time/date?

Sent from my iPhone
...nr4c. bill


> On Apr 8, 2020, at 7:43 PM, KK1L <[hidden email]> wrote:
>
> Folks,
>
> Wondering if it is possible to send a command to clear the clock on the KX2.
> I am considering using a macros to set the time, but the menu only allows
> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
> clear the clock to zero I could also set the time. I have looked through the
> command set pretty well and think the answer is "no", but figured I would
> ask.
>
> thanks.
>
> 73 es God Bless, KK1L Ron <><
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX2: Is it possible to clear the clock with a command on the interface?

Nr4c
In reply to this post by KK1L
Do you have the clock installed?  

Sent from my iPhone
...nr4c. bill


> On Apr 8, 2020, at 8:23 PM, Ron Rossi <[hidden email]> wrote:
>
> I just noticed that. It is greyed out for me. No option to click it.
>
> 73 es God Bless de KK1L...Ron Rossi ([hidden email]) <><
> QTH: Jericho, Vermont
> My page: http://kk1l.com
>
>> On 4/8/2020 20:00, Grant Youngman wrote:
>> It is not a macro.  It’s under the Configuration tab of the KX2 Utility …. it will set the KX2 tie to your computer time.
>>
>> Grant NQ5T
>>
>>>> On Apr 8, 2020, at 7:56 PM, Ron Rossi <[hidden email]> wrote:
>>>
>>> I did not find a direct set for the clock. I know about the MN074; command to bring up the clock and then UP;/DN; to change the hour or min or sec from whatever it happens to be. Setting the time automatically would have to start from a known state.
>>>
>>> 73 es God Bless de KK1L...Ron Rossi ([hidden email]) <><
>>> QTH: Jericho, Vermont
>>> My page: http://kk1l.com
>>>
>>> On 4/8/2020 19:45, Grant Youngman wrote:
>>>> You can set the tine from the KX2 utility ….
>>>>
>>>>> On Apr 8, 2020, at 7:41 PM, KK1L <[hidden email]> wrote:
>>>>>
>>>>> Folks,
>>>>>
>>>>> Wondering if it is possible to send a command to clear the clock on the KX2.
>>>>> I am considering using a macros to set the time, but the menu only allows
>>>>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
>>>>> clear the clock to zero I could also set the time. I have looked through the
>>>>> command set pretty well and think the answer is "no", but figured I would
>>>>> ask.
>>>>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]