KX3 Anomaly

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

KX3 Anomaly

N4CW
I am having an unexpected response from my KX3 and wonder if it portends  
some failure: in CW mode, when I hold the CMP/PITCH button down I hear the
tone,  the display briefly reads 500 Hz, then displays
HIGH CUR...this doesn't seem right.
Comments, inspiration, whatever?
Bert N4CW/K1IMI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KX3 Anomaly

Lyle Johnson
Does it do this with headphones?  If using the speaker, maybe the level
is too high?

73,

Lyle KK7P
> ...in CW mode, when I hold the CMP/PITCH button down I hear the
> tone,  the display briefly reads 500 Hz, then displays
> HIGH CUR...

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KX3 Anomaly

Mike WA8BXN
In reply to this post by N4CW
I had a similar thing happen recently, and resolved it with a bit of help
from Elecraft support. The problem is that the audio amplifier when using
the internal speaker can draw too much current due to high audio levels. In
my case I had the monitor level too high, so the key beeps caused HI CUR on
occasion. Solutions include turn down the levels some, use external
amplified speakers or headset.

 

73 - Mike WA8BXN

 

 

 

 

 

-------Original Message-------

 

From: [hidden email]

Date: 8/9/2013 3:04:22 PM

To: [hidden email]

Subject: [Elecraft] KX3 Anomaly

 

I am having an unexpected response from my KX3 and wonder if it portends

some failure: in CW mode, when I hold the CMP/PITCH button down I hear the

tone, the display briefly reads 500 Hz, then displays

HIGH CUR...this doesn't seem right.

Comments, inspiration, whatever?

Bert N4CW/K1IMI

______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html