I had a similar thing happen recently, and resolved it with a bit of help
from Elecraft support. The problem is that the audio amplifier when using
the internal speaker can draw too much current due to high audio levels. In
my case I had the monitor level too high, so the key beeps caused HI CUR on
occasion. Solutions include turn down the levels some, use external
amplified speakers or headset.
73 - Mike WA8BXN
-------Original Message-------
From:
[hidden email]
Date: 8/9/2013 3:04:22 PM
To:
[hidden email]
Subject: [Elecraft] KX3 Anomaly
I am having an unexpected response from my KX3 and wonder if it portends
some failure: in CW mode, when I hold the CMP/PITCH button down I hear the
tone, the display briefly reads 500 Hz, then displays
HIGH CUR...this doesn't seem right.
Comments, inspiration, whatever?
Bert N4CW/K1IMI
______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html