KX3 Operating Tip: Using the KXPD3 attached paddle as a hand key

[wayne burdick]

The KX3's attached keyer paddle is very flexible. Normally it is  
configured for right-handed use (MENU:CW KEY2 set to LEFT=DOT). You  
can reverse it by setting the parameter to LEFT=DASH.

In addition, you can set the CW KEY2 parameter to HAND. In this case  
both the left and right paddles will function like a hand key.

The KEY jack on the left side panel has the same feature, under  
control of the CW KEY1 menu entry. You can independently set up CW  
KEY1 and CW KEY2. So, for example, you could use an external hand key  
at KEY while using the KXPD3 as a keyer paddle, or vice-versa.

73,
Wayne
N6KR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[stan levandowski]

....turning the KXPD3 into a nice little sideswiper?  Way to go, Wayne!

73, stan WB2LQF
On Sun, Jun 10, 2012 at 7:16 PM, Wayne Burdick wrote:


> In addition, you can set the CW KEY2 parameter to HAND. In this case
> both the left and right paddles will function like a hand key.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[JP O'Connor]

My KX3 has cooties! ;-)


On Sun, Jun 10, 2012 at 10:30 PM, stan levandowski <[hidden email]>wrote:

> ....turning the KXPD3 into a nice little sideswiper?  Way to go, Wayne!
>
> 73, stan WB2LQF
> On Sun, Jun 10, 2012 at 7:16 PM, Wayne Burdick wrote:
>
>
> > In addition, you can set the CW KEY2 parameter to HAND. In this case
> > both the left and right paddles will function like a hand key.
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

... [show rest of quote]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ke9uw]

I would like to order a set of set screws and maybe a new top plate for my KXPD3. I put in the firm spring which works for me but had trouble with the top plate getting one of the pivot posts back in all the way...finally cleaning out the hole with a small round file.  All works great now, but a few spare parts would be good to have.
Can we expect a parts list sometime on the paddle?