KX3 - SSB Reception

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

KX3 - SSB Reception

Doug Plunkett
I’m not confident I have a problem as my KX3 operates fine but it seems something has changed. I’m using headphones. I receive other ham’s transmissions, both SSB and CW, fine through the headphones. On CW I hear MY transmissions through the headset, but on SSB I do not hear MY transmissions through the headset. Adjustment of the “MON” knob control does adjust the volume on CW through the headset (nothing on SSB since I don’t hear it via the headset). Is this normal behavior - not receiving my SSB transmissions through the headset - or is there a setting/control I have not able to locate?

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX3 - SSB Reception

Ronnie Hull
I HAVE to use headphones on my KX3 as the speaker sounds like crap!
W5SUM

Sent from my iPhone

> On Dec 15, 2020, at 11:13 AM, Doug Plunkett <[hidden email]> wrote:
>
> I’m not confident I have a problem as my KX3 operates fine but it seems something has changed. I’m using headphones. I receive other ham’s transmissions, both SSB and CW, fine through the headphones. On CW I hear MY transmissions through the headset, but on SSB I do not hear MY transmissions through the headset. Adjustment of the “MON” knob control does adjust the volume on CW through the headset (nothing on SSB since I don’t hear it via the headset). Is this normal behavior - not receiving my SSB transmissions through the headset - or is there a setting/control I have not able to locate?
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX3 - SSB Reception

NW0M
In reply to this post by Doug Plunkett
Doug,

I don't have my KX3 connected but I'm pretty sure it works the same as the
K3 and that is that the MON levels are separate for SSB and CW Sidetone.  So
make sure you are in SSB mode and Hold the MON button to advance the gain
higher than 0.  Give that a try.

73, Mitch
NWØM



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]