Jean-Francois,
Do you have the ATU in the KXPA100. Did you install the latest firmware in
the KX3 1.87 I believe.
I would check the TMP connectors to make sure they are fully seated & in the
correct sockets.
If the above don't help, I would contact the great guys at service on
Monday.
I just completed my KPA100 kit and have used it on the air a few times in
the shack before installing it in my truck.
My KX3 is now much better with the addition of the KXPA100.
I really like the fully integration between the KX3 & KXPA100; especially
the ATU integration.
Wish my K-Line was integrated as deeply.
73
George
AI4VZ
From: VA2SS
I monitored myself in my good old K2. If I use only the KX3, everything
works as it should. But immediately when and I turn on the PA in the KX3
menu and I try to transmit, I cannot hear anything in my K2, no matter the
power I choose MORE THAN 10W , the KX3 cannot be heard in my K2. Below 11W
I can hear my selft in my K2,
BUT by just hitting the PPT I still have a steady power output of the power
I asked for.... whithout speaking in the mic.... really strange.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
