Kpa500/kx3?

[Reginald J Mackey SR-3]

Has anyone connected  their  kx3 to the kpa500 amp?

Reggie k6xr
Amateur radio 58 years
DXCC, RCC, WAC

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[George Winship, NC5G]

<quote author="Reginald J Mackey SR-3">
Has anyone connected  their  kx3 to the kpa500 amp?

Yes, works great. About 175 watts average out.

73, George, NC5G

[Edward R Cole]

OK, apologies, not a KPA500, but -

My HB model EB27A kit from CCI drives well to 270w with 10w from
either my KX3 or the K3/10.  Recent check-ins to the Elecraft SSB Net
have been with my K3/10 driving the AN762 kit from CCI to 120w with 5.5w drive.

I have removed the old open-frame DPDT TR relay and building up the
TR pcb that I custom designed with pc relays to install on my 270w
PA.  About time to install it in an enclosure and add LP filtering
after sitting like a "beached whale" with heat sink down and circuits
exposed.

Go to "kits by kl7uw" for photos.

73, Ed - KL7UW
http://www.kl7uw.com
[hidden email]
"Kits made by KL7UW"

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html