Loaded K3 for sale

[Levent Sasmazel]

Hi,

I have a fully loaded beautiful K3 for sale (S/N 1230) radio just
returned from Elecraft all modifications are done by the Elecraft and
working perfectly.

Thanks and 73s,
Levent - WW2L
[hidden email]

----------------------

_*K3/100 (S/N 1230)*_

K3/10 (SN 1230) 10 W Transceiver, Kit *1,499.95*

KPA3 /Internal 100 W //_Upgrade_//for K3/10 /*449.95*

KAT3 Internal ATU with 2nd Ant. Jack *299.95*

KXV3A_UPGRUpgrade from existing KXV3 to KXV3A*69.95*

KDVR3 Digital Voice Recorder *129.95*

KBPF3 General Coverage RX Bandpass Module *139.95*

MH2 Hand Microphone(For the K3/K2) *59.95*

KUSB USB (Universal Serial Bus) Adapter for the K3 *39.95*

KFL3A-2.8K 2.8 kHz, Roofing Filter, 8-pole *130.95*

***TOTAL 2,820.55*

*Installed all needed updates done by ELECRAFT**:*

1)AF output mod.

2)Filter caps on 8 volt regulator.

3)VFO tuning noise mod.

4)Extreme signal protection mod.

5)KSYN3 ALC mod.

6)KSYN3 DDS mod.

7)KSYN3 stiffener.

8)RF immunity mod.

9)External negative ALC mod.

10)Replaced D36,37 with current part. (watt/SWR meter)

11)Loaded 4.25 MCU 2.71 DSP.

*Tests performed by ELECRAFT:*

-"Receive MDS. Transmit RF output power, two tone IMD and spurious levels.

-Checked functionality of all installed options including roofing filters.

-Ran VCO Cal. and set Ref cal. Performed TX gain cal. Checked watt meter
and S meter calibration.

-K3 SN 1230 has been found to meet or exceed published specifications.




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[John_N1JM]

So what's your price?

[Levent Sasmazel]

Just for clarification. Item is located in New Jersey (07733). Items and
price are listed here is for the configuration information not for the
actual price. I am open for any reasonable offer. Buyer will pay the
actual shipment of the equipment.

Thanks,
Levent

On 06/20/2011 11:34 PM, Levent Sasmazel wrote:

> Hi,
>
> I have a fully loaded beautiful K3 for sale (S/N 1230) radio just
> returned from Elecraft all modifications are done by the Elecraft and
> working perfectly.
>
> Thanks and 73s,
> Levent - WW2L
> [hidden email]
>
> ----------------------
>
> _*K3/100 (S/N 1230)*_
>
> K3/10 (SN 1230) 10 W Transceiver, Kit *1,499.95*
>
> KPA3 /Internal 100 W //_Upgrade_//for K3/10 /*449.95*
>
> KAT3 Internal ATU with 2nd Ant. Jack *299.95*
>
> KXV3A_UPGRUpgrade from existing KXV3 to KXV3A*69.95*
>
> KDVR3 Digital Voice Recorder *129.95*
>
> KBPF3 General Coverage RX Bandpass Module *139.95*
>
> MH2 Hand Microphone(For the K3/K2) *59.95*
>
> KUSB USB (Universal Serial Bus) Adapter for the K3 *39.95*
>
> KFL3A-2.8K 2.8 kHz, Roofing Filter, 8-pole *130.95*
>
> ***TOTAL 2,820.55*
>
> *Installed all needed updates done by ELECRAFT**:*
>
> 1)AF output mod.
>
> 2)Filter caps on 8 volt regulator.
>
> 3)VFO tuning noise mod.
>
> 4)Extreme signal protection mod.
>
> 5)KSYN3 ALC mod.
>
> 6)KSYN3 DDS mod.
>
> 7)KSYN3 stiffener.
>
> 8)RF immunity mod.
>
> 9)External negative ALC mod.
>
> 10)Replaced D36,37 with current part. (watt/SWR meter)
>
> 11)Loaded 4.25 MCU 2.71 DSP.
>
> *Tests performed by ELECRAFT:*
>
> -"Receive MDS. Transmit RF output power, two tone IMD and spurious levels.
>
> -Checked functionality of all installed options including roofing
> filters.
>
> -Ran VCO Cal. and set Ref cal. Performed TX gain cal. Checked watt
> meter and S meter calibration.
>
> -K3 SN 1230 has been found to meet or exceed published specifications.
>
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html