Loosing VOX setting during power cycle in CW mode

[PA3CW]

I posted a question before about this issue, that i notice only after the latest firmware update. When VOX is ON in CW and switch the K3 off and on again, i loose the VOX setting and have to press the VOX button again to be able to transmit in CW. It does not keep the latest setting. This does not occur in LSB, where the setting is kept. Is this a known issue?
Thanks,
Dick PA3CW

[Guy, K2AV]

What firmware revision number does "latest" refer to?  Things are moving
fast.  73, Guy.

On Fri, Oct 16, 2009 at 11:00 AM, PA3CW <[hidden email]> wrote:

>
> I posted a question before about this issue, that i notice only after the
> latest firmware update. When VOX is ON in CW and switch the K3 off and on
> again, i loose the VOX setting and have to press the VOX button again to be
> able to transmit in CW. It does not keep the latest setting. This does not
> occur in LSB, where the setting is kept. Is this a known issue?
> Thanks,
> Dick PA3CW
> --
> View this message in context:
> http://n2.nabble.com/Loosing-VOX-setting-during-power-cycle-in-CW-mode-tp3836009p3836009.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Gary Bartlett VE1RGB]

Dick:

        Wayne introduced the following change at 3.10.  Just reverse the
following procedure:

* CW VOX OFF BY DEFAULT ON POWER-UP: Some stations using PC control
> may inadvertently key the K3 in CW mode on power-up if VOX CW is in
> effect. If this is an issue at your station, locate the CONFIG:CW WGHT
> menu entry and tap '4', changing VOX NOR to AUTO OFF. This will make
> CW VOX default to OFF when the K3 is turned on.

        73,
        Gary, VE1RGB

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of PA3CW
Sent: October 16, 2009 12:00 PM
To: [hidden email]
Subject: [Elecraft] Loosing VOX setting during power cycle in CW mode


I posted a question before about this issue, that i notice only after the
latest firmware update. When VOX is ON in CW and switch the K3 off and on
again, i loose the VOX setting and have to press the VOX button again to be
able to transmit in CW. It does not keep the latest setting. This does not
occur in LSB, where the setting is kept. Is this a known issue?
Thanks,
Dick PA3CW
--
View this message in context:
http://n2.nabble.com/Loosing-VOX-setting-during-power-cycle-in-CW-mode-tp383
6009p3836009.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N5GE]

On Fri, 16 Oct 2009 08:00:24 -0700 (PDT), PA3CW <[hidden email]>
wrote:

>
>I posted a question before about this issue, that i notice only after the
>latest firmware update. When VOX is ON in CW and switch the K3 off and on
>again, i loose the VOX setting and have to press the VOX button again to be
>able to transmit in CW. It does not keep the latest setting. This does not
>occur in LSB, where the setting is kept. Is this a known issue?
>Thanks,
>Dick PA3CW

I'm not seeing this on #806 or #1055.

Tom, N5GE

[hidden email]
K3 #806, K3 #1055, PR6,
XV144, XV432, KRC2,
W1 and other small kits.

2 W2's on order
1 K144XV on order

http://www.n5ge.com
http://www.swotrc.net

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[PA3CW]

Thanks for the replies. Yes, the setting in the menu to VOX norm solved the problem.  It occured after installing the latest beta firmware. Maybe the default setting has changed here. Anyway, thanks for the help of solving the issue.
73,
Dick PA3CW

Radio Amateur N5GE wrote

On Fri, 16 Oct 2009 08:00:24 -0700 (PDT), PA3CW <[e-mail]>
wrote:

>
>I posted a question before about this issue, that i notice only after the
>latest firmware update. When VOX is ON in CW and switch the K3 off and on
>again, i loose the VOX setting and have to press the VOX button again to be
>able to transmit in CW. It does not keep the latest setting. This does not
>occur in LSB, where the setting is kept. Is this a known issue?
>Thanks,
>Dick PA3CW

I'm not seeing this on #806 or #1055.

Tom, N5GE

[e-mail]
K3 #806, K3 #1055, PR6,
XV144, XV432, KRC2,
W1 and other small kits.

2 W2's on order
1 K144XV on order

http://www.n5ge.com
http://www.swotrc.net

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html