MD2

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

MD2

Phil LaMarche
Just received my MD2 and see it is necessary to modify my K@ to use it.
It's that rather silly from a marketing stand point?  I would have thought
plug and play.

Phil

Philip LaMarche
LaMarche Enterprises, Inc.
www.instantgourmetspices.com
727-944-3226
(800) 395-7795 pin 02
Cell 727-510-5038
FAX- 727-937-8834
N.A.S.F.T # 30210
W9DVM
 
 
 
 

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.290 / Virus Database: 265.4.4 - Release Date: 11/30/2004
 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: MD2

Bill_Harris
I would bet, that's the reason they were discounted.  Smart move on Elecraft's part, only wish we were advised before hand.   Other than that, I'm satisfied with mine.  Now when I can get the K2 to talk up, it will be a win-win situation.

Later
KXBill


> Just received my MD2 and see it is necessary to modify my K@ to use it.
> It's that rather silly from a marketing stand point?  I would have thought
> plug and play.
>
> Phil
>
> Philip LaMarche
> LaMarche Enterprises, Inc.
> www.instantgourmetspices.com
> 727-944-3226
> (800) 395-7795 pin 02
> Cell 727-510-5038
> FAX- 727-937-8834
> N.A.S.F.T # 30210
> W9DVM
>  
>  
>  
>  
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.290 / Virus Database: 265.4.4 - Release Date: 11/30/2004
>  
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: MD2

Don Wilhelm-3
In reply to this post by Phil LaMarche
Phil,

I don't understand what needs to be modified - it is plug and play if you
are wired for an Elecraft mic already.

Those jumpers and the resistor are supplied with every Elecraft mic
including the on-sale MD2 - just in case they are needed.

What is necessary is that the mic configuration header and mic jack be wired
for the 'Elecraft standard' - all header pins wired straight across and a
5.6k resistor on the mic jack between pins 1 and 6.  That wiring will
support any Elecraft mic that is currently available and I figure for any
future mics to be introduced in the future.

You alway do have the choice of modifying the wiring at the mic plug if you
want to retain the mic header configuration you have been using with other
mics.  My choice is to always use the Elecraft configuration (I do modify it
a bit so I can use mics that do not want voltage supplied to the AF line).

73
Don W3FPR

----- Original Message -----

> Just received my MD2 and see it is necessary to modify my K@ to use it.
> It's that rather silly from a marketing stand point?  I would have thought
> plug and play.
>


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com