Message 'Firmware Files Missing'

[Roger Stein]

I am not having success with the Firmware Upload process.

OS on old Laptop PC is Windows 2000, K3 Utility loads ok, COM1 selected,
selecting the Test Communications
yields "K3 is running main program RS232 4800bps"

Current versions installed on K3 boards displays as: MCU-1.34 DSP-1.35

The path is C:\Program Files\Elecraft K3 Utility\firmware to receive files.

I keep getting the 'missing files' message and to See Help-Troubleshooting.

OK, I go to Troubleshooting via the Help page and I must not be holding my
mouth
right, (fishing talk), but the obvious is not.........

Otherwise...K3 #75 is receiving nicely!! and generates RF!! No QSO's yet.
The PA
module awaits installation.  I spent quite a bit of time just looking over
the
boards under magnification....absolutely amazing...going from the ideas to
the
physical!!!

73, Roger WA7BOC
K3 #75
K2 #755 has a new home in Oregon, once the K3 is all set.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Roger Stein]

"I am not having success with the Firmware Upload process."

Ah-ha, I got it....I had not 'manually' created the file folder "firmware".
I went to the Elecraft ftp site and copied the files directly to my 'new'
folder,
and then all was right in the K3 utility program.
Yes, Yes, it was in the trouble-shooting section!!

I am an analog guy in a digital world!!

73, Roger
WA7BOC

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[AC7AC]

CONTENTS DELETED

The author has deleted this message.