Elecraft › [K3]

Multiple ACC ports needed

Classic

List

Threaded

5 messages Options

Keith Heimbold

Multiple ACC ports needed

All -

I am a new K3 owner and I just noticed that my K3 needs to connect both the 6m preamp and my Quadra amplifier to the ACC port on the K3. Does anyone know of a device or cable that would allow me to bridge across multiple external devices. Any assistance would be much appreciated.

Thanks,

Keith
AG6AZ

Sent from my iPhone please excuse typos
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Keith Heimbold

Re: Multiple ACC ports needed

Disregard email. I found the proper connector.

Sorry to bother everyone.

Keith
AG6AZ

Sent from my iPhone please excuse typos

On Dec 9, 2011, at 12:54 PM, "Keith Heimbold" <[hidden email]> wrote:

> All -
>
> I am a new K3 owner and I just noticed that my K3 needs to connect both the 6m preamp and my Quadra amplifier to the ACC port on the K3. Does anyone know of a device or cable that would allow me to bridge across multiple external devices. Any assistance would be much appreciated.
>
> Thanks,
>
> Keith
> AG6AZ
>
> Sent from my iPhone please excuse typos
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Joe Subich, W4TV-4

Re: Multiple ACC ports needed

In reply to this post by Keith Heimbold

Check the reflector archives. This has been discussed "many* times.

The "simple" solution is an "all 15" Y-cable:

www.cablewholesale.com p/n 10H1-27708

It's still listed for $3.44 in single quantity with a notation "in
stock - Usually ships same day"

73,

... Joe, W4TV

On 12/9/2011 3:54 PM, Keith Heimbold wrote:

Keith Heimbold

Re: Multiple ACC ports needed

Please disregard question. Sorry for inconvenience.

Thanks,

Keith
AG6AZ

Sent from my iPhone please excuse typos

On Dec 9, 2011, at 1:23 PM, "Joe Subich, W4TV" <[hidden email]> wrote:

>
> Check the reflector archives. This has been discussed "many* times.
>
> The "simple" solution is an "all 15" Y-cable:
>
> www.cablewholesale.com p/n 10H1-27708
>
> It's still listed for $3.44 in single quantity with a notation "in
> stock - Usually ships same day"
>
> 73,
>
> ... Joe, W4TV
>
>
> On 12/9/2011 3:54 PM, Keith Heimbold wrote:
>> All -
>>
>> I am a new K3 owner and I just noticed that my K3 needs to connect both the 6m preamp and my Quadra amplifier to the ACC port on the K3. Does anyone know of a device or cable that would allow me to bridge across multiple external devices. Any assistance would be much appreciated.
>>
>> Thanks,
>>
>> Keith
>> AG6AZ
>>
>> Sent from my iPhone please excuse typos
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>

Doug Turnbull

Re: Multiple ACC ports needed

Hi All,
I never paid any attention to this in the past but am grateful that
Keith brought up the question. I will order a cable myself as at the
moment there is a new requirement for the ACC port at EI2CN. Thank you to
both Joe and Keith.
73 Doug EI2CN

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Keith Heimbold
Sent: 09 December 2011 21:30
To: Joe Subich, W4TV
Cc: [hidden email]
Subject: Re: [Elecraft] Multiple ACC ports needed

Please disregard question. Sorry for inconvenience.

Thanks,

Keith
AG6AZ

Sent from my iPhone please excuse typos

On Dec 9, 2011, at 1:23 PM, "Joe Subich, W4TV" <[hidden email]> wrote:

the 6m preamp and my Quadra amplifier to the ACC port on the K3. Does anyone
know of a device or cable that would allow me to bridge across multiple
external devices. Any assistance would be much appreciated.

>>
>> Thanks,
>>
>> Keith
>> AG6AZ
>>
>> Sent from my iPhone please excuse typos
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html