Your problem is obviously with N1MM+, not with your elecraft rigs. It would
have been more appropriate to post your message to the N1MMLoggerPlus
reflector.
Be that as it may, my guess would be that you are using an inappropriate
N1MM Logger.ini (configuration) file, namely one that has been configured
for a dual-receiver K3.
In the N1MM+ Config menu, make sure the Sub Receiver Always On menu item is
not checked. It appears as if you may have this option selected; if so,
that would be what is causing Dual RX to be turned on when you change bands.
In the Configurer, make sure the SO1V radio button is selected; I suspect
you may have SO2V selected; SO2V is not really appropriate for a KX2 or
KX3. Also, make sure that the selected radio type is Elecraft KX3, not
Elecraft K3.
N1MM+ does not send ATU commands to the radio as far as I am aware. I can
only guess that your configuration is such that K3 commands for the second
receiver are being sent, and that these are having some kind of side
effects on the KX2/KX3, possibly because the second receiver's Entry window
is starting up on a different band. Using an ini file that is configured
for the correct radio in SO1V mode should resolve this.
If you wish to use N1MM+ with more than one radio (not SO2R, just different
radios at different times), you should not try to use the same ini file for
all. N1MM+ has a way to use multiple ini files for this kind of situation.
This is described in the on-line documentation at <
http://n1mmplus.hamdocs.com/tiki-index.php?page=Program+Installation+and+Setup&structure=N1MM+Logger+Documentation#Multiple_ini_Files>.
73,
Rich VE3KI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
