Need K3,KPA550 & KAT500 cabling diagram

[Bill OMara]

Can someone point me to the location or send me a cabling diagram for
connection all three devices.

 

I need to make sure I have or order all of the required cables and "Y's" to
have full operability of the system.

 

Thanks and 73 Bill  W4RM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Figure 1 on page 5 of the KAT500 owner's manual (I'm looking at revision C).

If you have other things to connect to the AUX connector you may need a Y.
For the basic K3, KAT500, and KPA500 you don't need any Ys, you just need
two of the 15-pin accessory cables.

73 de Dick, K6KR



-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Bill OMara
Sent: Saturday, August 24, 2013 13:20 PM
To: [hidden email]
Subject: [Elecraft] Need K3,KPA550 & KAT500 cabling diagram

Can someone point me to the location or send me a cabling diagram for
connection all three devices.

 

I need to make sure I have or order all of the required cables and "Y's" to
have full operability of the system.

 

Thanks and 73 Bill  W4RM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Ian Kahn, KM4IK]

Bill,

The proper wiring diagrams are in KAT500 (p. 5)  manual, available for
download from Elecraft's web site.

KAT500 -
http://www.elecraft.com/manual/E740183%20KAT500%20Owner's%20Manual-%20Rev%20
C.pdf

Hope this helps, and gud luck.

73,

--Ian 
Ian Kahn, KM4IK
Roswell, GA  EM74ua
[hidden email]
K3 #281, P3 #688, KPA500 #1468
HRD v5.x/6.0 Test Team

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Bill OMara
Sent: Saturday, August 24, 2013 4:20 PM
To: [hidden email]
Subject: [Elecraft] Need K3,KPA550 & KAT500 cabling diagram

Can someone point me to the location or send me a cabling diagram for
connection all three devices.

 

I need to make sure I have or order all of the required cables and "Y's" to
have full operability of the system.

 

Thanks and 73 Bill  W4RM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html