New K3 Utility

[Roy Morris-6]

A new K3 Utility Production Release 1.12.9.22 is now available dated
10-2-12.  This replaces beta 1.12.3.28.  Roy  W4WFB

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill Clarke]

What advantage or improvements does this new version offer over
1.4.10.11 version?

Thanks,

Bill W2BLC #6225
--
IN GOD I TRUST (but, NOT a single politician)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[vk4tux]

 

K3 Utility:
After completing a new software download to your K3, please power cycle the K3 OFF and then back ON before using it.

•K3 Utility (Windows Version 1.12.9.22)  October 2, 2012

◦Note: This K3 Utility version can be used to load K3 MCU versions 1.32 and above to your K3.

◦Download and run the file from the above link.

◦Use this utility to check for the latest releases of new features for your K3.

◦Requires either a RS-232 cable or KUSB Serial-USB Cable to download from your PC to the K3.

•K3 Utility (MAC OS X Version 1.12.9.22)  October 2, 2012

◦Note: This K3 Utility version can be used to load K3 MCU versions 1.32 and above to your K3.

◦This K3 Utility version is REQUIRED to load K3 MCU versions 1.79 and above to your K3.

◦Files are in universal binary in .zip file.

◦Use this utility to check for the latest releases of new features for your K3.

◦Requires either a RS-232 cable or KUSB Serial-USB Cable to download from your Mac to the K3.

•K3 Utility (Linux .tgz Version 1.12.9.22)  October 2, 2012  

◦Note: This K3 Utility version can be used to load K3 MCU versions 1.32 and above to your K3.

◦This K3 Utility version is REQUIRED to load K3 MCU versions 1.79 and above to your K3.

◦Files are in TAR archive (gzip-compressed) format.

◦Use this utility to check for the latest releases of new features for your K3.

◦Requires either a RS-232 cable or KUSB Serial-USB Cable to download from your computer to the K3.

[Mike Harris]

The web site still points to 1.12.3.28.  Also no info about the PR10

Regards,

Mike VP8NO

On 02/10/2012 16:37, Roy Morris wrote:
> A new K3 Utility Production Release 1.12.9.22 is now available dated
> 10-2-12.  This replaces beta 1.12.3.28.  Roy  W4WFB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[vk4tux]

Link points to;

http://www.elecraft.com/K3/software/K3_Utility_Setup_1_12_9_22.exe

from

http://www.elecraft.com/K3/k3_software.htm

@  •K3 Utility (Windows Version 1.12.9.22)  October 2, 2012

[Dave Anderson, K4SV]

On my KPA500 the air is drawn in from the top of the case and blown out the back, the proper way to cool an enclosed cabinet.  As long as air is allowed to enter the case between the KAT500 I believe it wont case a problem.  Besides, the airflow is at a low volume most of the time unless your pushing the amp hard.

My 2 cents
 
Dave Anderson, K4SV
Tryon, NC
 828 777-5088
 
www.K4SV.com
 

>________________________________
> From: Mike Harris <[hidden email]>
>To: [hidden email]
>Sent: Wednesday, October 3, 2012 5:57 PM
>Subject: Re: [Elecraft] New K3 Utility
>
>The web site still points to 1.12.3.28.  Also no info about the PR10
>
>Regards,
>
>Mike VP8NO
>
>On 02/10/2012 16:37, Roy Morris wrote:
>> A new K3 Utility Production Release 1.12.9.22 is now available dated
>> 10-2-12.  This replaces beta 1.12.3.28.  Roy  W4WFB
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html