New product: Accessory cable set for the KX3

[wayne burdick]

Hi all,

The KX3-PCKT cable set can be used to conveniently connect the  
Elecraft KX3 to a variety of external devices. All cables are  
shielded, high-quality units that include molded right-angle plugs at  
the KX3 end. This eliminates the need for bulky adapters, and  
maintains a clean, compact installation.

Possible applications include:

   - receive and transmit line-level audio to/from computer
   - receive I/Q signals for use with SDR software (panadapter, etc.)
   - external foot switches, transmit sequencers, etc. (ACC2 GPIO)
   - power amplifier and transverter keying (ACC2 keyline out)

The set consists of four cables:

   - 3.5 mm stereo both ends, with green color-code bands (TX or RX  
audio)
   - 3.5 mm stereo both ends, with red color-code bands (TX or RX audio)
   - 2.5 mm stereo to 3.5 mm stereo (RX I/Q)
   - 2.5 mm stereo to RCA (ACC2 KEY OUT) + 3.5 mm mono (ACC2 GPIO); 6"  
long

For photos and additional information, please download the KX3-PCKT  
instruction sheet. It can be found in the KX3 options list:

   http://www.elecraft.com/elecraft_prod_list.htm#kx3

73,
Wayne
N6KR


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jeff Herr]

Wow....i will add to my order.
Thank you.
WW6L



-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Wayne Burdick
Sent: Tuesday, August 21, 2012 1:25 PM
To: Elecraft Reflector; [hidden email]
Subject: [Elecraft] New product: Accessory cable set for the KX3

Hi all,

The KX3-PCKT cable set can be used to conveniently connect the Elecraft KX3
to a variety of external devices. All cables are shielded, high-quality
units that include molded right-angle plugs at the KX3 end. This eliminates
the need for bulky adapters, and maintains a clean, compact installation.

Possible applications include:

   - receive and transmit line-level audio to/from computer
   - receive I/Q signals for use with SDR software (panadapter, etc.)
   - external foot switches, transmit sequencers, etc. (ACC2 GPIO)
   - power amplifier and transverter keying (ACC2 keyline out)

The set consists of four cables:

   - 3.5 mm stereo both ends, with green color-code bands (TX or RX
audio)
   - 3.5 mm stereo both ends, with red color-code bands (TX or RX audio)
   - 2.5 mm stereo to 3.5 mm stereo (RX I/Q)
   - 2.5 mm stereo to RCA (ACC2 KEY OUT) + 3.5 mm mono (ACC2 GPIO); 6"  
long

For photos and additional information, please download the KX3-PCKT
instruction sheet. It can be found in the KX3 options list:

   http://www.elecraft.com/elecraft_prod_list.htm#kx3

73,
Wayne
N6KR


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Edward R Cole]

My order went in last night.

I figured the cost of connectors and cable and do not see how
Elecraft is making any profit with the four cable package.  The ACC2
breaking out KEY to the female phono jack is my initial need to
key-up my 2m transverter.

Even if I build a computer interface the cables will be used.  I note
the mic connector is a three contact stereo vs the four contact plug
on the MH3, guessing the missing contact is for the UP/DN
buttons.  If I make a box that the mic can connect I will lose that
function but its not one I will use in the shack (only mobile).

73, Ed - KL7UW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html