New signal generator XG3

classic Classic list List threaded Threaded
54 messages Options
123
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

AC7AC
CONTENTS DELETED
The author has deleted this message.
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

Eric Swartz - WA6HHQ
Administrator
In reply to this post by ab2tc
RS-232. The cable is included.

73, Eric
----

On 4/13/2011 3:33 PM, ab2tc wrote:

> Hi,
>
> Very interesting. Perhaps somewhat hastily I placed an order for one as I
> have been looking for something like this for a while. I couldn't figure out
> from the manual what's needed to connect to the computer interface. What is
> the type of connector and does Elecraft sell a special cable for it?
>
> AB2TC - Knut
>
>
> AC7AC wrote:
>> I had the same reaction, but don't forget the low-pass filter. That "RF"
>> is
>> a square wave with very rich harmonics!
>>
>> Ron AC7AC
>>
>>
>>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/New-signal-generator-XG3-tp6270420p6270864.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

Bill K9YEQ
In reply to this post by wayne burdick
Wayne,

Did you leave room inside for an SSB SMD board and micro tuner?  I ordered
one so I just need to know.  I also did the 144 transverter mod just after
noting the email for the former.  In the meantime you guys slipped me a head
fake with the 144 mod so I called! I hope I don't miss anything coming out
tomorrow in this order.  Like a remote 1.5 KW tuner.  :-)

73,
Bill
K9YEQ


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Wayne Burdick
Sent: Wednesday, April 13, 2011 4:36 PM
To: Rick Dettinger
Cc: Elecraft Elecraft; QRP-L; [hidden email]
Subject: Re: [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source

Rick Dettinger wrote:

> 0 dbm.  OK, how do I key this QRP transmitter....

You could key it from a PC with a couple of RS232 commands, although the
keying won't be shaped unless you do it externally.

As far as I know, no one on our staff has made a QSO on an XG3 yet.  
But keep in mind that 0 dBm is only 30 dB below 1 watt. So if your 1-W QRP
rig is S9 at the receiving end, the XG3 would be about S3.

Suitable antenna design is left to the reader.

73,
Wayne
N6KR


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

Jim Rhodes-2
In reply to this post by ab2tc
Looks like the same cable as the W1?? Seems to be same type of jack anyway.

Jim K0XU
Sent from my Droid X
On Apr 13, 2011 5:33 PM, "ab2tc" <[hidden email]> wrote:
> Hi,
>
> Very interesting. Perhaps somewhat hastily I placed an order for one as I
> have been looking for something like this for a while. I couldn't figure
out
> from the manual what's needed to connect to the computer interface. What
is

> the type of connector and does Elecraft sell a special cable for it?
>
> AB2TC - Knut
>
>
> AC7AC wrote:
>>
>> I had the same reaction, but don't forget the low-pass filter. That "RF"
>> is
>> a square wave with very rich harmonics!
>>
>> Ron AC7AC
>>
>>
>>
>
>
> --
> View this message in context:
http://elecraft.365791.n2.nabble.com/New-signal-generator-XG3-tp6270420p6270864.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

Eric Champine
In reply to this post by wayne burdick
Quick question.
So I can use the XG3 for alignment on all of my kits rather than using
another transceiver for that. Correct?
Sounds like it to me and if so, I am going to love it. I like to build kits
a lot. Have to hold off till next payday to order one,
I was thinking about getting the XG2 for alignment but it didn't cover all
the bands I use so I just used my 897D. The XG3 sounds much more easy to use
for that :-) Please correct me if I am wrong. Thanks Elecraft and thanks to
all.

73 de W2EEC

Eric
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

Eric Swartz - WA6HHQ
Administrator
In reply to this post by Jim Rhodes-2
Yes, and its included with the XG3.
73,
Eric


On 4/13/2011 5:16 PM, Jim Rhodes wrote:
> Looks like the same cable as the W1?? Seems to be same type of jack anyway.
>
> Jim K0XU
>   ----
> On Apr 13, 2011 5:33 PM, "ab2tc"<[hidden email]>  wrote:
>>   I couldn't figure out
>> from the manual what's needed to connect to the computer interface. What
> is the type of connector and does Elecraft sell a special cable for it?
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

Eric Swartz - WA6HHQ
Administrator
In reply to this post by Eric Champine
Hi Eric,
That's exactly the idea. :-)

73, Eric   WA6HHQ
----

On 4/13/2011 5:27 PM, Eric Champine wrote:

> Quick question.
> So I can use the XG3 for alignment on all of my kits rather than using
> another transceiver for that. Correct?
> Sounds like it to me and if so, I am going to love it. I like to build kits
> a lot. Have to hold off till next payday to order one,
> I was thinking about getting the XG2 for alignment but it didn't cover all
> the bands I use so I just used my 897D. The XG3 sounds much more easy to use
> for that :-) Please correct me if I am wrong. Thanks Elecraft and thanks to
> all.
>
> 73 de W2EEC
> Eric
> ______________________________________________________________
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: XG3 All-Band RF Signal Source/phase noise performance?

juergen piezo
In reply to this post by wayne burdick
Hi

No phase noise performance data in the manual. What is the phase noise performance of the XG3 like?

My HP8640 is being held together by a miracles and prayers, I need a replacement.

73
John

--- On Wed, 4/13/11, Wayne Burdick <[hidden email]> wrote:

> From: Wayne Burdick <[hidden email]>
> Subject: Re: [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source
> To: "Rick Dettinger" <[hidden email]>
> Cc: "Elecraft Elecraft" <[hidden email]>, "QRP-L" <[hidden email]>, [hidden email]
> Date: Wednesday, April 13, 2011, 2:36 PM
> Rick Dettinger wrote:
>
> > 0 dbm.  OK, how do I key this QRP
> transmitter....
>
> You could key it from a PC with a couple of RS232 commands,
> although 
> the keying won't be shaped unless you do it externally.
>
> As far as I know, no one on our staff has made a QSO on an
> XG3 yet. 
> But keep in mind that 0 dBm is only 30 dB below 1 watt. So
> if your 1-W 
> QRP rig is S9 at the receiving end, the XG3 would be about
> S3.
>
> Suitable antenna design is left to the reader.
>
> 73,
> Wayne
> N6KR
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: XG3 All-Band RF Signal Source/phase noise performance?

wayne burdick
Administrator
Hi John,

Phase noise is specified in the manual. It is a relatively constant  
-105 dBc/Hz, even at very close spacings, which is excellent  
performance for a low-cost, wide-range signal source.

I wouldn't amplify it to 1KW.

Let me know how it works for you as a replacement for the HP8640. Not  
as many knobs and switches, but it runs from a 9-V battery.

73,
Wayne
N6KR


On Apr 13, 2011, at 6:46 PM, juergen wrote:

> Hi
>
> No phase noise performance data in the manual. What is the phase  
> noise performance of the XG3 like?
>
> My HP8640 is being held together by a miracles and prayers, I need a  
> replacement.
>
> 73
> John

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: XG3 All-Band RF Signal Source/phase noise performance?

Don Wilhelm-4
In reply to this post by juergen piezo
  John,

Sorry to hear that your 8640 is nearing its end.

My recommendation (and my personal preference) - hang onto the HP8640
for as long as it works - in  the available signal generator field, it
cannot be beat for low phase noise along with a well calibrated output
attenuator.  Sure it takes a couple hours for it to stop drifting, but
the other factors make it a very worthwhile tool for the workbench.
I now have 2 HP8640's, but I have ordered the XG3 because it is
convenient and will be the "workhorse" of the workbench signal
generators.  But when it comes down to applications that require no
leakage, and well calibrated output levels down to -140 dBm (and below
with in-line attenuators), you can bet that the old '8640 will be my
generator of choice.

The XG3 will be replacing my XG1 and XG2, but the HP8640 will stay at
the bench for those times when nothing else will do as well.

73,
Don W3FPR

On 4/13/2011 9:46 PM, juergen wrote:

> Hi
>
> No phase noise performance data in the manual. What is the phase noise performance of the XG3 like?
>
> My HP8640 is being held together by a miracles and prayers, I need a replacement.
>
> 73
> John
>
> --- On Wed, 4/13/11, Wayne Burdick<[hidden email]>  wrote:
>
>> From: Wayne Burdick<[hidden email]>
>> Subject: Re: [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source
>> To: "Rick Dettinger"<[hidden email]>
>> Cc: "Elecraft Elecraft"<[hidden email]>, "QRP-L"<[hidden email]>, [hidden email]
>> Date: Wednesday, April 13, 2011, 2:36 PM
>> Rick Dettinger wrote:
>>
>>> 0 dbm.  OK, how do I key this QRP
>> transmitter....
>>
>> You could key it from a PC with a couple of RS232 commands,
>> although
>> the keying won't be shaped unless you do it externally.
>>
>> As far as I know, no one on our staff has made a QSO on an
>> XG3 yet.
>> But keep in mind that 0 dBm is only 30 dB below 1 watt. So
>> if your 1-W
>> QRP rig is S9 at the receiving end, the XG3 would be about
>> S3.
>>
>> Suitable antenna design is left to the reader.
>>
>> 73,
>> Wayne
>> N6KR
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource

Dr. Dan Swartling
In reply to this post by Eric Swartz - WA6HHQ
This is the 21st century. It is 2011. Why does the XG3 have an RS232 port and not a USB port?

Dan   WB4NMR


-----Original Message-----
From: [hidden email] on behalf of Eric Swartz - WA6HHQ, Elecraft
Sent: Wed 4/13/2011 7:51 PM
To: Eric Champine
Cc: Elecraft Elecraft; QRP-L; [hidden email]; Wayne Burdick
Subject: Re: [QRP-L] [Elecraft] New Elecraft product: XG3 All-Band RF SignalSource
 
Hi Eric,
That's exactly the idea. :-)

73, Eric   WA6HHQ
----

On 4/13/2011 5:27 PM, Eric Champine wrote:

> Quick question.
> So I can use the XG3 for alignment on all of my kits rather than using
> another transceiver for that. Correct?
> Sounds like it to me and if so, I am going to love it. I like to build kits
> a lot. Have to hold off till next payday to order one,
> I was thinking about getting the XG2 for alignment but it didn't cover all
> the bands I use so I just used my 897D. The XG3 sounds much more easy to use
> for that :-) Please correct me if I am wrong. Thanks Elecraft and thanks to
> all.
>
> 73 de W2EEC
> Eric
> ______________________________________________________________
>
______________________________________________________________
QRP-L mailing list
Home: http://mailman.qth.net/mailman/listinfo/qrp-l
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource

wayne burdick
Administrator
Hi Dan,

While we might do a USB version in the future, our RS232  
implementation meets all of our criteria:

- it generates no RFI that might modulate the RF signal
- takes almost no PCB space
- is inexpensive, helping keep the cost of the instrument low
- uses almost no supply current
- and is backwards-compatible with older PCs that have only  
traditional serial ports

Nearly all our customers already have USB to serial adapters for use  
with other station equipment, both ours and that of other manufacturers.

73,
Wayne
N6KR


A USB port contributes more RFI, takes more board space
On Apr 13, 2011, at 9:57 PM, Daniel Swartling wrote:

> This is the 21st century. It is 2011. Why does the XG3 have an RS232  
> port and not a USB port?


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource

Phil Hystad-3
In reply to this post by Dr. Dan Swartling
My keyboard and my mouse are Bluetooth, why not all future devices from Elecraft support Bluetooth connections (well, as long as the bandwidth is acceptable)?  I really have this great urge to get rid of all connecting cables just like in the old Star Trek TV episode "The Ultimate Computer" (episode #53, stardate 4729.4).


On Apr 13, 2011, at 9:57 PM, Daniel Swartling wrote:

> This is the 21st century. It is 2011. Why does the XG3 have an RS232 port and not a USB port?
>
> Dan   WB4NMR
>
>
> -----Original Message-----
> From: [hidden email] on behalf of Eric Swartz - WA6HHQ, Elecraft
> Sent: Wed 4/13/2011 7:51 PM
> To: Eric Champine
> Cc: Elecraft Elecraft; QRP-L; [hidden email]; Wayne Burdick
> Subject: Re: [QRP-L] [Elecraft] New Elecraft product: XG3 All-Band RF SignalSource
>
> Hi Eric,
> That's exactly the idea. :-)
>
> 73, Eric   WA6HHQ
> ----
>
> On 4/13/2011 5:27 PM, Eric Champine wrote:
>> Quick question.
>> So I can use the XG3 for alignment on all of my kits rather than using
>> another transceiver for that. Correct?
>> Sounds like it to me and if so, I am going to love it. I like to build kits
>> a lot. Have to hold off till next payday to order one,
>> I was thinking about getting the XG2 for alignment but it didn't cover all
>> the bands I use so I just used my 897D. The XG3 sounds much more easy to use
>> for that :-) Please correct me if I am wrong. Thanks Elecraft and thanks to
>> all.
>>
>> 73 de W2EEC
>> Eric
>> ______________________________________________________________
>>
> ______________________________________________________________
> QRP-L mailing list
> Home: http://mailman.qth.net/mailman/listinfo/qrp-l
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource

Joe Subich, W4TV-4
In reply to this post by Dr. Dan Swartling


 > Why does the XG3 have an RS232 port and not a USB port?

Not again!  USB is very operating system dependent and incurs a
significant overhead cost in licensing as well as software cost
for multiple operating systems.  In addition, not all controllers
have built-in USB support (nearly all PICs have a native serial
port) and the hardware/development cost is significantly for
those devices with embedded USB ports.  Finally, the bill of
materials is more expensive with USB and the final product
must be physically larger to accommodate the added USB port.

All of the above make RS-232 the right choice for these products
and continued "why no USB port" complaints extremely unwelcome.

73,

    ... Joe, W4TV

On 4/14/2011 12:57 AM, Daniel Swartling wrote:

> This is the 21st century. It is 2011. Why does the XG3 have an RS232 port and not a USB port?
>
> Dan   WB4NMR
>
>
> -----Original Message-----
> From: [hidden email] on behalf of Eric Swartz - WA6HHQ, Elecraft
> Sent: Wed 4/13/2011 7:51 PM
> To: Eric Champine
> Cc: Elecraft Elecraft; QRP-L; [hidden email]; Wayne Burdick
> Subject: Re: [QRP-L] [Elecraft] New Elecraft product: XG3 All-Band RF SignalSource
>
> Hi Eric,
> That's exactly the idea. :-)
>
> 73, Eric   WA6HHQ
> ----
>
> On 4/13/2011 5:27 PM, Eric Champine wrote:
>> Quick question.
>> So I can use the XG3 for alignment on all of my kits rather than using
>> another transceiver for that. Correct?
>> Sounds like it to me and if so, I am going to love it. I like to build kits
>> a lot. Have to hold off till next payday to order one,
>> I was thinking about getting the XG2 for alignment but it didn't cover all
>> the bands I use so I just used my 897D. The XG3 sounds much more easy to use
>> for that :-) Please correct me if I am wrong. Thanks Elecraft and thanks to
>> all.
>>
>> 73 de W2EEC
>> Eric
>> ______________________________________________________________
>>
> ______________________________________________________________
> QRP-L mailing list
> Home: http://mailman.qth.net/mailman/listinfo/qrp-l
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

M0XDF
In reply to this post by wayne burdick
Wayne, will the software to do this be available for Mac OSX?
73 de M0XDF, K3 #174, P3 #108
--
Ideas are like rabbits. You get a couple and learn how to handle them, and
pretty soon you have a dozen.
--John Steinbeck, novelist, Nobel laureate (1902-1968)

On 13 Apr 2011, at 21:31, Wayne Burdick wrote:

> Any of the band switches can be programmed to cover any frequency in  
> the 1.5 to 200 MHz range (or higher, using harmonics) by connecting a  
> PC to the unit.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [QRP-L] New Elecraft product: XG3 All-Band RF SignalSource

gm3sek
In reply to this post by Phil Hystad-3
Phil Hystad wrote:
>I really have this great urge to get rid of all connecting cables just
>like in the old Star Trek TV episode "The Ultimate Computer" (episode
>#53, stardate 4729.4).

Meanwhile, back in Series 1, Mr Spock was still having trouble with the
small screen of his P3:

<http://tinyurl.com/3ed9dwu>



--

73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

vk4tux
In reply to this post by wayne burdick

> As far as I know, no one on our staff has made a QSO on an XG3 yet.
> But keep in mind that 0 dBm is only 30 dB below 1 watt. So if your 1-W
> QRP rig is S9 at the receiving end, the XG3 would be about S3.
>
> Suitable antenna design is left to the reader.
>
> 73,
> Wayne
> N6KR
>
Wayne would it be possible to provide a click-able link on the picture;

http://www.elecraft.com/images/XG3v2%20100.jpg

to a larger picture so we can see the detail please?

Adrian ... vk4tux
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

M0XDF
go look at the manual : http://www.elecraft.com/manual/XG3%20Owner%27s%20Manual%20Rev%20B.pdf
- front page has BIG picture
73 de M0XDF, K3 #174, P3 #108
--
Sometimes I think we're alone in the universe, and sometimes I think
we're not. In either case, the idea is quite staggering.
-Arthur C Clarke, science fiction writer (1917- )

On 14 Apr 2011, at 10:08, Adrian wrote:
> Wayne would it be possible to provide a click-able link on the picture;
>
> http://www.elecraft.com/images/XG3v2%20100.jpg
>
> to a larger picture so we can see the detail please?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

Terry Schieler
In reply to this post by Eric Swartz - WA6HHQ
Forgive me if I missed this, but the web site shows the available XG3 as
"assembled".  Can we anticipate a kit version at a later date?

Great product!

73,

Terry, W0FM



-----Original Message-----
From: Eric Swartz - WA6HHQ, Elecraft [mailto:[hidden email]]
Sent: Wednesday, April 13, 2011 7:10 PM
To: ab2tc
Cc: [hidden email]
Subject: Re: [Elecraft] New Elecraft product: XG3 All-Band RF Signal Source

RS-232. The cable is included.

73, Eric
----

On 4/13/2011 3:33 PM, ab2tc wrote:
> Hi,
>
> Very interesting. Perhaps somewhat hastily I placed an order for one as I
> have been looking for something like this for a while. I couldn't figure
out
> from the manual what's needed to connect to the computer interface. What
is

> the type of connector and does Elecraft sell a special cable for it?
>
> AB2TC - Knut
>
>
> AC7AC wrote:
>> I had the same reaction, but don't forget the low-pass filter. That "RF"
>> is
>> a square wave with very rich harmonics!
>>
>> Ron AC7AC
>>
>>
>>
>
> --
> View this message in context:
http://elecraft.365791.n2.nabble.com/New-signal-generator-XG3-tp6270420p6270
864.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: New Elecraft product: XG3 All-Band RF Signal Source

Eric Swartz - WA6HHQ
Administrator
In reply to this post by vk4tux
I will add this this morning.
Eric


On 4/14/2011 2:08 AM, Adrian wrote:

>
>
> > As far as I know, no one on our staff has made a QSO on an XG3 yet.
> > But keep in mind that 0 dBm is only 30 dB below 1 watt. So if your 1-W
> > QRP rig is S9 at the receiving end, the XG3 would be about S3.
> >
> > Suitable antenna design is left to the reader.
> >
> > 73,
> > Wayne
> > N6KR
> >
> Wayne would it be possible to provide a click-able link on the picture;
>
> http://www.elecraft.com/images/XG3v2%20100.jpg
>
> to a larger picture so we can see the detail please?
>
> Adrian ... vk4tux
>
> [Non-text portions of this message have been removed]
>
> __._,_.___
> Reply to sender
> <mailto:[hidden email]?subject=Re%3A%20%5BElecraft%5D%20New%20Elecraft%20product%3A%20%20XG3%20All-Band%20RF%20Signal%20Source>
> | Reply to group
> <mailto:[hidden email]?subject=Re%3A%20%5BElecraft%5D%20New%20Elecraft%20product%3A%20%20XG3%20All-Band%20RF%20Signal%20Source>
> | Reply via web post
> <http://groups.yahoo.com/group/elecraft/post;_ylc=X3oDMTJvdHU0ODEwBF9TAzk3MzU5NzE0BGdycElkAzk0MTUzMDYEZ3Jwc3BJZAMxNzA1MDYzMTA4BG1zZ0lkAzY1OARzZWMDZnRyBHNsawNycGx5BHN0aW1lAzEzMDI3OTA1NTM-?act=reply&messageNum=658>
> | Start a New Topic
> <http://groups.yahoo.com/group/elecraft/post;_ylc=X3oDMTJlYzM3b2M3BF9TAzk3MzU5NzE0BGdycElkAzk0MTUzMDYEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwNmdHIEc2xrA250cGMEc3RpbWUDMTMwMjc5MDU1Mw-->
>
> Messages in this topic
> <http://groups.yahoo.com/group/elecraft/message/652;_ylc=X3oDMTMyb3FtdnYzBF9TAzk3MzU5NzE0BGdycElkAzk0MTUzMDYEZ3Jwc3BJZAMxNzA1MDYzMTA4BG1zZ0lkAzY1OARzZWMDZnRyBHNsawN2dHBjBHN0aW1lAzEzMDI3OTA1NTMEdHBjSWQDNjUy>
> (4)
> Recent Activity:
>
>     * New Members
>       <http://groups.yahoo.com/group/elecraft/members;_ylc=X3oDMTJmNGZ1amNnBF9TAzk3MzU5NzE0BGdycElkAzk0MTUzMDYEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwN2dGwEc2xrA3ZtYnJzBHN0aW1lAzEzMDI3OTA1NTM-?o=6>
>       3
>
> Visit Your Group
> <http://groups.yahoo.com/group/elecraft;_ylc=X3oDMTJlc2VjOHBlBF9TAzk3MzU5NzE0BGdycElkAzk0MTUzMDYEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTMwMjc5MDU1Mw-->
>
> Yahoo! Groups
> <http://groups.yahoo.com/;_ylc=X3oDMTJkbzBnaHZyBF9TAzk3MzU5NzE0BGdycElkAzk0MTUzMDYEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMzAyNzkwNTUz>
>
> Switch to: Text-Only
> <mailto:[hidden email]?subject=Change%20Delivery%20Format:%20Traditional>,
> Daily Digest
> <mailto:[hidden email]?subject=Email%20Delivery:%20Digest>
> . Unsubscribe
> <mailto:[hidden email]?subject=Unsubscribe> .
> Terms of Use <http://docs.yahoo.com/info/terms/>
> .
>
> __,_._,___
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
123