New wierd K3s behavior

[Jim AB3CV]

When I turn on my K3s (and let it finish booting) and try pressing TUNE
(hold XMIT) I get a zero power indication rather than tune power if in DATA
A mode.

A quick trip to CW then hitting a few dits on the paddle produces the
expected 100w barefoot power.

Then returning to DATA A and TUNE and the expected tune power is emitted.

No idea why this would occur and it is a new thing. I have recently updated
to the latest beta firmware for the enhanced KPA1500 integration. Perhaps a
bug was introduced there?

Ideas?

Jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim AB3CV]

weird...not wierd...

not enuf coffee...

jim

On Tue, May 22, 2018 at 8:11 AM, Jim Miller <[hidden email]> wrote:

> When I turn on my K3s (and let it finish booting) and try pressing TUNE
> (hold XMIT) I get a zero power indication rather than tune power if in DATA
> A mode.
>
> A quick trip to CW then hitting a few dits on the paddle produces the
> expected 100w barefoot power.
>
> Then returning to DATA A and TUNE and the expected tune power is emitted.
>
> No idea why this would occur and it is a new thing. I have recently
> updated to the latest beta firmware for the enhanced KPA1500 integration.
> Perhaps a bug was introduced there?
>
> Ideas?
>
> Jim ab3cv
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Wes Stewart-2]

Does it happen on all bands?

Wes  N7WS

On 5/22/2018 5:11 AM, Jim Miller wrote:

> When I turn on my K3s (and let it finish booting) and try pressing TUNE
> (hold XMIT) I get a zero power indication rather than tune power if in DATA
> A mode.
>
> A quick trip to CW then hitting a few dits on the paddle produces the
> expected 100w barefoot power.
>
> Then returning to DATA A and TUNE and the expected tune power is emitted.
>
> No idea why this would occur and it is a new thing. I have recently updated
> to the latest beta firmware for the enhanced KPA1500 integration. Perhaps a
> bug was introduced there?
>
> Ideas?
>
> Jim ab3cv

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim AB3CV]

never mind...

operator error

On Tue, May 22, 2018 at 8:11 AM, Jim Miller <[hidden email]> wrote:

> When I turn on my K3s (and let it finish booting) and try pressing TUNE
> (hold XMIT) I get a zero power indication rather than tune power if in DATA
> A mode.
>
> A quick trip to CW then hitting a few dits on the paddle produces the
> expected 100w barefoot power.
>
> Then returning to DATA A and TUNE and the expected tune power is emitted.
>
> No idea why this would occur and it is a new thing. I have recently
> updated to the latest beta firmware for the enhanced KPA1500 integration.
> Perhaps a bug was introduced there?
>
> Ideas?
>
> Jim ab3cv
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]