No Power Output

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

No Power Output

KB1PXD
Hello everyone,
as of last evening, my K3 is no longer indicating any
power output on the RF meter during transmit.  I've
tried both PTT and VOX, as well as 2 different antennas.
(dipole & beam)  When selecting "ATU TUNE", I see the
RF meter go to 5W as expected, but the SWR indicator
above only displays "- -".  I've gone through all the settings
and they look correct.  The PWR knob is fully clockwise,
I'm not in test mode, etc., etc.  I've sent an email to Elecraft
but I thought I'd check here as well to see if anyone has
seen this behavior.  

Thanks,
- Bill
KB1PXD
Reply | Threaded
Open this post in threaded view
|

Re: No Power Output

Arie Kleingeld PA3A-2
Bill,

Had the same thing once.
Reloaded the firmware and that solved the problem here.

73
Arie PA3A

-----Oorspronkelijk bericht-----
Van: [hidden email]
[mailto:[hidden email]] Namens KB1PXD
Verzonden: zondag 22 maart 2009 15:07
Aan: [hidden email]
Onderwerp: [Elecraft] [K3] No Power Output



Hello everyone,
as of last evening, my K3 is no longer indicating any
power output on the RF meter during transmit.  I've
tried both PTT and VOX, as well as 2 different antennas. (dipole & beam)
When selecting "ATU TUNE", I see the RF meter go to 5W as expected, but
the SWR indicator above only displays "- -".  I've gone through all the
settings and they look correct.  The PWR knob is fully clockwise, I'm
not in test mode, etc., etc.  I've sent an email to Elecraft but I
thought I'd check here as well to see if anyone has
seen this behavior.  

Thanks,
- Bill
KB1PXD
--
View this message in context:
http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html
Sent from the [K3] mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: No Power Output

KB1PXD
Thanks for the quick response Arie.  I tried upgrading
my firmware from 2.67 to 2.78 but I'm still seeing the
same results. (RF meter remains at 0 when transmitting)

- Bill

Arie Kleingeld PA3A-2 wrote
Bill,

Had the same thing once.
Reloaded the firmware and that solved the problem here.

73
Arie PA3A

-----Oorspronkelijk bericht-----
Van: elecraft-bounces@mailman.qth.net
[mailto:elecraft-bounces@mailman.qth.net] Namens KB1PXD
Verzonden: zondag 22 maart 2009 15:07
Aan: elecraft@mailman.qth.net
Onderwerp: [Elecraft] [K3] No Power Output



Hello everyone,
as of last evening, my K3 is no longer indicating any
power output on the RF meter during transmit.  I've
tried both PTT and VOX, as well as 2 different antennas. (dipole & beam)
When selecting "ATU TUNE", I see the RF meter go to 5W as expected, but
the SWR indicator above only displays "- -".  I've gone through all the
settings and they look correct.  The PWR knob is fully clockwise, I'm
not in test mode, etc., etc.  I've sent an email to Elecraft but I
thought I'd check here as well to see if anyone has
seen this behavior.  

Thanks,
- Bill
KB1PXD
--
View this message in context:
http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html
Sent from the [K3] mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: No Power Output

w7aqk
In reply to this post by KB1PXD
I apologize if this sounds like I am suggesting the obvious,
but you didn't happen to accidentally put it in "test" mode
did you?  Press and hold the right side of the mode button
to return to "operating" mode.  Just a thought.

Dave W7AQK


----- Original Message -----
From: "KB1PXD" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, March 22, 2009 7:06 AM
Subject: [Elecraft] [K3] No Power Output


>
> Hello everyone,
> as of last evening, my K3 is no longer indicating any
> power output on the RF meter during transmit.  I've
> tried both PTT and VOX, as well as 2 different antennas.
> (dipole & beam)  When selecting "ATU TUNE", I see the
> RF meter go to 5W as expected, but the SWR indicator
> above only displays "- -".  I've gone through all the
> settings
> and they look correct.  The PWR knob is fully clockwise,
> I'm not in test mode, etc., etc.  I've sent an email to
> Elecraft
> but I thought I'd check here as well to see if anyone has
> seen this behavior.
>
> Thanks,
> - Bill
> KB1PXD
> --
> View this message in context:
> http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html
> Sent from the [K3] mailing list archive at Nabble.com.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: No Power Output

KB1PXD
Thanks for the reply Dave but I had already checked that.

- Bill

dyarnes-2 wrote
I apologize if this sounds like I am suggesting the obvious,
but you didn't happen to accidentally put it in "test" mode
did you?  Press and hold the right side of the mode button
to return to "operating" mode.  Just a thought.

Dave W7AQK


----- Original Message -----
From: "KB1PXD" <bill.kimura@gmail.com>
To: <elecraft@mailman.qth.net>
Sent: Sunday, March 22, 2009 7:06 AM
Subject: [Elecraft] [K3] No Power Output


>
> Hello everyone,
> as of last evening, my K3 is no longer indicating any
> power output on the RF meter during transmit.  I've
> tried both PTT and VOX, as well as 2 different antennas.
> (dipole & beam)  When selecting "ATU TUNE", I see the
> RF meter go to 5W as expected, but the SWR indicator
> above only displays "- -".  I've gone through all the
> settings
> and they look correct.  The PWR knob is fully clockwise,
> I'm not in test mode, etc., etc.  I've sent an email to
> Elecraft
> but I thought I'd check here as well to see if anyone has
> seen this behavior.
>
> Thanks,
> - Bill
> KB1PXD
> --
> View this message in context:
> http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html
> Sent from the [K3] mailing list archive at Nabble.com.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html