No Receive or Transmit.

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

No Receive or Transmit.

Stuart
I have just switched on my K3 for the CW-T activity to find I have no receive or transmit. The radio was working fine last night, no problems at all

I have tried the EE INIT and reloading firmware to no effect.

Any help would be appreciated

Stuart, GD0OUD.

Sent from Mail for Windows 10

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: No Receive or Transmit.

Alan - G4GNX
Have you tried restoring your configuration? With all the lightning we've
had recently, maybe the memory got zapped?

When you say no receive, do you mean absolutely no audio or just no signals?
Wrong antenna selected? Do you appear to generate RF when you attempt to
Tune?

I recently switched on our club's K3 after performing some major upgrades,
including SMD components. There was no receive audio and after the initial
panic subsided, I realised that I had inadvertently turned the RF gain to
zero. Is that a possibility with yours as well as possibly having the TX in
Test mode or the power turned right down?

73,

Alan. G4GNX

-----Original Message-----
From: Stuart Hill
Sent: Wednesday, May 31, 2017 2:25 PM
To: [hidden email]
Subject: [Elecraft] No Receive or Transmit.

I have just switched on my K3 for the CW-T activity to find I have no
receive or transmit. The radio was working fine last night, no problems at
all

I have tried the EE INIT and reloading firmware to no effect.

Any help would be appreciated

Stuart, GD0OUD.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: No Receive or Transmit.

Stuart
Hi Alan,
              Thank you for your reply.

I tried a reset and reloading configuration but this did nothing, followed
by a sinking feeling in my stomach!

I have various transceivers and antennas coupled by switches, and as you can
imagine, I sometimes get the combination wrong, but this was not the case
this time.

The radio did not receive anything, just a background hiss, but no signals
at all. I transmitted into a dummy load via a power meter and this showed no
output.

Research on the internet suggested checking the TMP connectors on and around
the synthesiser board, but this did not help.

Next I refitted the original synthesiser board, and now the radio seems
fine, suggesting the KSYN3A is faulty.

I have had a reply from Matthew, VK5ZM,who had a similar problem, and this
was caused by the LO not running, but I think that only applies if the 2m
module is fitted. I will investigate and let you know how I got on.

Thanks again,
                        Stuart, GD0OUD.
 
-----Original Message-----
From: G4GNX [mailto:[hidden email]]
Sent: 31 May 2017 15:25

Have you tried restoring your configuration? With all the lightning we've
had recently, maybe the memory got zapped?

When you say no receive, do you mean absolutely no audio or just no signals?

Wrong antenna selected? Do you appear to generate RF when you attempt to
Tune?

I recently switched on our club's K3 after performing some major upgrades,
including SMD components. There was no receive audio and after the initial
panic subsided, I realised that I had inadvertently turned the RF gain to
zero. Is that a possibility with yours as well as possibly having the TX in
Test mode or the power turned right down?

73,

Alan. G4GNX



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: No Receive or Transmit.

Nr4c
In reply to this post by Stuart
Which antenna is selected?



Sent from my iPhone
...nr4c. bill


> On May 31, 2017, at 9:25 AM, Stuart Hill <[hidden email]> wrote:
>
> I have just switched on my K3 for the CW-T activity to find I have no receive or transmit. The radio was working fine last night, no problems at all
>
> I have tried the EE INIT and reloading firmware to no effect.
>
> Any help would be appreciated
>
> Stuart, GD0OUD.
>
> Sent from Mail for Windows 10
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]