No SSB output 160-30M

[alsopb]

K3 #1129 FW 2.02/1.77

Rig has full CW output on these bands.  FSK D output is also normal all
bands.

SSB output is about 2-8 watts on these bands either USB or LSB.  Works
perfectly on 20-6M on SSB-- either USB or LSB.
No adjustment of mike gain brings output up. 2.7KHz crystal filter is
selected for transmit.  Receive is normal.
No equalization is used. Tune puts out set power.  Though when one goes
to tune the power slowly rises to set power over half a second.  This
happens all bands. TSG VCG is set to 0db.

73 de Brian/K3KO

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Dave, G4AON]

Brian

I assume you have done the TX gain calibration at both 5 and 50 Watts on
all bands?

Dave, G4AON
K3/100 #80
----------------
K3 #1129 FW 2.02/1.77

Rig has full CW output on these bands. FSK D output is also normal all
bands.

SSB output is about 2-8 watts on these bands either USB or LSB. Works
perfectly on 20-6M on SSB-- either USB or LSB.
No adjustment of mike gain brings output up. 2.7KHz crystal filter is
selected for transmit. Receive is normal.
No equalization is used. Tune puts out set power. Though when one goes
to tune the power slowly rises to set power over half a second. This
happens all bands. TSG VCG is set to 0db.

73 de Brian/K3KO
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[alsopb]

Fixed this.  Don't have a clue what I did though.

Reloaded the same firmware.  Loaded the old configuration.
Went through all calibrations again.

Magically SSB output appeared on the missing bands.  All bands now work cw,ssb, fsk d.  Haven't tested other modes.

The odd thing is that CW worked on the "missing" bands.  Must have missed doing something first time through.

73 de Brian/K3KO

alsopb wrote

K3 #1129 FW 2.02/1.77

Rig has full CW output on these bands.  FSK D output is also normal all
bands.

SSB output is about 2-8 watts on these bands either USB or LSB.  Works
perfectly on 20-6M on SSB-- either USB or LSB.
No adjustment of mike gain brings output up. 2.7KHz crystal filter is
selected for transmit.  Receive is normal.
No equalization is used. Tune puts out set power.  Though when one goes
to tune the power slowly rises to set power over half a second.  This
happens all bands. TSG VCG is set to 0db.

73 de Brian/K3KO

_______________________________________________
Elecraft mailing list
Post to: [e-mail]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com