No Speaker Output from Internal Speaker?

[Jeffrey Maass]

I just installed the KRX3. As instructed, I have set "SPKRS  1" in the CONFIG menu. I do
not have an external speaker plugged in.

The problem is that there is no audio from the internal speaker. The headphone jack on the
front panel works OK. The speaker is plugged in to the correct place (P25) inside the
cabinet, and is oriented correctly.

The "SPKR+PH" item is set to "NO". If I set it to "YES", then audio is output from the
internal speaker and the headphone jack as expected.

Why might the internal speaker be disconnected in normal operation? Is there a CONFIG or
MENU item I may be missing?



73,  Jeff  K8ND
 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[W5CEM]

When you turn on the rig, do you hear a pop?  Or the same when you power down?  

As much as I hate to admit it, my speaker was not working when I got it.  I only knew, as was building K3#1931 along with another fellow building his.  We plugged in his speaker and all was OK!!!

But the fine folks at ELECRAFT shipped one out the next day, plugged it in, and all is right with world.  Sounds as if your config is properly done.  

cleve/W5CEM

[Ignacy]

I have an identical problem. Also the output from the rear headphones jack is to one ear only and the packet output is null with the default setting.

Because I also have another problem (PA trips at high power on 10m only), the radio is going for service.
Ignacy
 

[Ignacy]

The symptoms were without KRX3. Sorry for the omission.
Ignacy