No Voice

[Natan Huffman]

Hello,

Just received a new K3 and I can't seem to get it to transmit any of the
voice modes.  I have done the following:

Upgraded firmware as instructed, Verified both VFO's are on USB or LSB,
enabled the Front Panel connector, Verified all CONFIG files.  Any other
ideas to get SSB out of the K3/  CW works perfectly and I'm using a factory
Elecraft microphone too and with the factory mic, I do not get anything at
all.

Any ideas?

Thanks,

Natan W6XR, C6AXR, VS6KR
Freeville, NY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[w0mu]

You need to turn the bias on.  push the 2 button while setting the mic
for front panel.

Mike W0MU

W0MU-1 CC Cluster w0mu.net


On 12/9/2011 8:59 AM, Natan Huffman wrote:

> Hello,
>
> Just received a new K3 and I can't seem to get it to transmit any of the
> voice modes.  I have done the following:
>
> Upgraded firmware as instructed, Verified both VFO's are on USB or LSB,
> enabled the Front Panel connector, Verified all CONFIG files.  Any other
> ideas to get SSB out of the K3/  CW works perfectly and I'm using a factory
> Elecraft microphone too and with the factory mic, I do not get anything at
> all.
>
> Any ideas?
>
> Thanks,
>
> Natan W6XR, C6AXR, VS6KR
> Freeville, NY
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Natan Huffman]

Thanks to all and especially Tony K2SG who knew exactly what to do.

73

Natan W6XR, C6AXR, VS6KR

On Fri, Dec 9, 2011 at 10:59 AM, Natan Huffman <[hidden email]> wrote:

> Hello,
>
> Just received a new K3 and I can't seem to get it to transmit any of the
> voice modes.  I have done the following:
>
> Upgraded firmware as instructed, Verified both VFO's are on USB or LSB,
> enabled the Front Panel connector, Verified all CONFIG files.  Any other
> ideas to get SSB out of the K3/  CW works perfectly and I'm using a factory
> Elecraft microphone too and with the factory mic, I do not get anything at
> all.
>
> Any ideas?
>
> Thanks,
>
> Natan W6XR, C6AXR, VS6KR
> Freeville, NY
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html