Norm 1 <SAV> ?
Locked
 
|
I can't get the custom settings for NORM1 or NORM2 to save.
FW 4.012 I set the bandwidth where I want the custom setting to be for NORM1 (800HZ), I hold the SHIFT knob until it says <-- SAV --> and then still holding rotate the knob to NORM 1. I release the knob. When I hold SHIFT for <-- NOR --> it's back at the default of 400hz. Is this for my radio or all radios with this firmware? 73 de K1ESE John ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Hi John,
My K3 (s/n 4521) works correct, I think- hihi! I punch the I/II button for I, then set DSP for the bandwidth I want saved, then hold 'NORM' (is that what you mean by "SHIFT"?) until <SAV> appears, then rotate the knob to the left. I then do the same procedure for a different bandwidth and store this BW in II. Now to get to my saved bandwidths, I have to press 'I' or 'II' and it works just fine. Thanks for the Q in the CWT! 73, Tom-W4BQF -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of John Huffman Sent: Friday, October 15, 2010 5:44 AM To: Elecraft List Subject: [Elecraft] Norm 1 <SAV> ? I can't get the custom settings for NORM1 or NORM2 to save. FW 4.012 I set the bandwidth where I want the custom setting to be for NORM1 (800HZ), I hold the SHIFT knob until it says <-- SAV --> and then still holding rotate the knob to NORM 1. I release the knob. When I hold SHIFT for <-- NOR --> it's back at the default of 400hz. Is this for my radio or all radios with this firmware? 73 de K1ESE John ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by John Huffman-3
Sorry - I did not include all of the information in my prior email.
Hi John, My K3 (s/n 4521) works correct, I think- hihi! I punch the I/II button for I, then set DSP for the bandwidth I want saved, then hold 'NORM' (is that what you mean by "SHIFT"?) until <SAV> appears, then rotate the knob to the left. I then do the same procedure for a different bandwidth and store this BW in II. Now to get to my saved bandwidths, I have to press 'I' or 'II' and it works just fine. If I press the NORM button until <NORM> appears and select either "I" or "II", the bandwidth does change, because I can hear the difference plus I can see the filter switch from FL3 to FL2, however the bandwidth display on the K3 does not change. The bandwidth's I was testing with were 500hz and 250hz. Thanks for the Q in the CWT! 73, Tom-W4BQF -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of John Huffman Sent: Friday, October 15, 2010 5:44 AM To: Elecraft List Subject: [Elecraft] Norm 1 <SAV> ? I can't get the custom settings for NORM1 or NORM2 to save. FW 4.012 I set the bandwidth where I want the custom setting to be for NORM1 (800HZ), I hold the SHIFT knob until it says <-- SAV --> and then still holding rotate the knob to NORM 1. I release the knob. When I hold SHIFT for <-- NOR --> it's back at the default of 400hz. Is this for my radio or all radios with this firmware? 73 de K1ESE John ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by John Huffman-3
Tom -
I updated my firmware to 4.14, but still no joy. I did have the K3 lock up last week and Elecraft support walked me through a hard reset. I thought I had things back to normal, but now I'm not sure. No matter what I SAV, NOR always goes to the default 400hz on I or II. Yup, thanks for the CWT QSOs, two bands this month and two sessions last month. You put a great signal into Manie. 73 de K1ESE John ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In order to pick up what you saved on Norm 1 or 2
Press, hold and rotate the Shift/Lo/Norm knob 73 de M0XDF On 15 Oct 2010, at 12:20, John Huffman wrote: > Tom - > > I updated my firmware to 4.14, but still no joy. I did have the K3 lock > up last week and Elecraft support walked me through a hard reset. I > thought I had things back to normal, but now I'm not sure. > > No matter what I SAV, NOR always goes to the default 400hz on I or II. > > Yup, thanks for the CWT QSOs, two bands this month and two sessions last > month. You put a great signal into Manie. > > 73 de K1ESE > John > ______________________________________________________________ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by John Huffman-3
David -
> Press, hold and rotate the Shift/Lo/Norm knob Ah! That's the ticket. I missed the part on the hold AND twist to get the custom bandwidth recalled. Many thanks! 73 de K1ESE John ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to [K3]
|
1 view|%1 views
| Free forum by Nabble | Edit this page |