OT: Coax Switch After the Tuner?

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

OT: Coax Switch After the Tuner?

hank_stamper
Hello Wise and Powerful Reflector;

I have a couple of doublets I feed with balanced line.  The balanced  
line goes to a current balun and then a short coax run (5') to my  
tuner.  After the tuner I have another short coax run (3') to a coax  
switch that places either my antenna analyzer or the rig in the system  
so I can tune the antenna.  I've had it suggested to me that the coax  
switch places my precious K3 in danger.  The fact that this  
arrangement has worked up until this point isn't reassuring.  What say  
you all?

TIA,

73 de Eric, KG6MZS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: OT: Coax Switch After the Tuner?

Don Wilhelm-4
Eric,

The only danger to the K3 that I can think of is if you fail to turn the
switch to the K3 position and subsequently transmit.
If you listen before transmitting, you should be able to determine that
the switch is incorrect - no signals equal switch in the wrong position.

73,
Don W3FPR

Eric Fitzgerald wrote:

> Hello Wise and Powerful Reflector;
>
> I have a couple of doublets I feed with balanced line.  The balanced  
> line goes to a current balun and then a short coax run (5') to my  
> tuner.  After the tuner I have another short coax run (3') to a coax  
> switch that places either my antenna analyzer or the rig in the system  
> so I can tune the antenna.  I've had it suggested to me that the coax  
> switch places my precious K3 in danger.  The fact that this  
> arrangement has worked up until this point isn't reassuring.  What say  
> you all?
>
> TIA,
>
> 73 de Eric, KG6MZS
>
>  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: OT: Coax Switch After the Tuner?

AC7AC
In reply to this post by hank_stamper
CONTENTS DELETED
The author has deleted this message.